인력 및 재료 오염 제거 장비

원격 추출 캐비닛을 갖춘 저 프로파일 접착 소일 클리너

A low SUS304 adhesive-mat tray paired with an independent suction-and-filtration cabinet for dry contamination-control entry areas.

Low-profile SUS304 mat tray
Replaceable adhesive collection media
Separate filtered extraction cabinet
Remote service access

견적 요청 제품 찾아보기

상품 소개

This two-part entry system keeps the walking surface and extraction service equipment separate. The low-profile SUS304 tray holds replaceable adhesive collection media at the approach point, while an independently located suction-and-filtration cabinet manages extracted dust from the designated collection zone. The layout suits dry controlled entries where the service cabinet should not occupy the personnel walking surface.

주요 기능

The low stainless steel tray gives adhesive collection media a defined, stable location.

Replaceable adhesive sheets or film can be changed without moving the extraction cabinet.

The separate cabinet allows filter service away from the entry mat position.

A low threshold profile reduces the step-up at the personnel route.

The mat tray and cabinet can be positioned to suit the available entrance geometry.

고객 제품 관심사

A dry entry may need adhesive collection at floor level while placing suction and filter servicing away from the walking line.

A raised dust-control unit disrupts a narrow personnel route.The SUS304 mat tray uses a low-profile format at the approach point.

Filter servicing beside the entry surface creates congestion.The suction-and-filtration cabinet is independent from the adhesive mat tray.

Adhesive media must be renewed without dismantling the complete entry system.The mat tray accepts replaceable adhesive media as a separate service item.

Dry areas cannot use a wet footwear-cleaning process.The system relies on dry adhesive collection and a separate extraction arrangement.

일반적인 응용 프로그램

Electronics cleanroom approachesDry pharmaceutical support entriesPrecision optics changing areasBattery dry-room access zonesLaboratory personnel routes

기술 매개변수

The tray footprint, adhesive-media format and remote cabinet placement can be selected around the dry entry layout.

핵심 재료	SUS304 adhesive mat tray with separate SUS304 filtered extraction cabinet
패널 두께	1.0–1.5 mm stainless steel tray and cabinet panels
유효 폭	450–800 mm active adhesive mat width
최대 길이	600–1200 mm low-profile mat length
강철 면면 두께	1.0–1.5 mm SUS304
코어 밀도	900–950 kg/m³ for adhesive-film polymer backing
열전도도 (Thermal Conductivity)	0.35–0.45 W/(m·K) for adhesive-film polymer backing
표면 마무리	Brushed SUS304 tray and cabinet with replaceable adhesive collection media
접합 유형	Removable adhesive-media tray with independently ducted filter cabinet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Adhesive sheet or film formatSingle or dual mat-tray layoutExtraction cabinet positionPre-filter and final-filter service stages

Planning a Low-Profile Adhesive Sole Cleaner with Remote Extraction Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.