Peralatan Dekontaminasi Kakitangan dan Bahan

Pembersih tunggal pelekat profil rendah dengan Kabinet Pengekstrakan Jauh

A low SUS304 adhesive-mat tray paired with an independent suction-and-filtration cabinet for dry contamination-control entry areas.

Low-profile SUS304 mat tray
Replaceable adhesive collection media
Separate filtered extraction cabinet
Remote service access

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This two-part entry system keeps the walking surface and extraction service equipment separate. The low-profile SUS304 tray holds replaceable adhesive collection media at the approach point, while an independently located suction-and-filtration cabinet manages extracted dust from the designated collection zone. The layout suits dry controlled entries where the service cabinet should not occupy the personnel walking surface.

Ciri-ciri Utama

The low stainless steel tray gives adhesive collection media a defined, stable location.

Replaceable adhesive sheets or film can be changed without moving the extraction cabinet.

The separate cabinet allows filter service away from the entry mat position.

A low threshold profile reduces the step-up at the personnel route.

The mat tray and cabinet can be positioned to suit the available entrance geometry.

Kebimbangan Produk Pelanggan

A dry entry may need adhesive collection at floor level while placing suction and filter servicing away from the walking line.

A raised dust-control unit disrupts a narrow personnel route.The SUS304 mat tray uses a low-profile format at the approach point.

Filter servicing beside the entry surface creates congestion.The suction-and-filtration cabinet is independent from the adhesive mat tray.

Adhesive media must be renewed without dismantling the complete entry system.The mat tray accepts replaceable adhesive media as a separate service item.

Dry areas cannot use a wet footwear-cleaning process.The system relies on dry adhesive collection and a separate extraction arrangement.

Permohonan yang biasa

Electronics cleanroom approachesDry pharmaceutical support entriesPrecision optics changing areasBattery dry-room access zonesLaboratory personnel routes

Parameter teknikal

The tray footprint, adhesive-media format and remote cabinet placement can be selected around the dry entry layout.

Bahan Teras	SUS304 adhesive mat tray with separate SUS304 filtered extraction cabinet
Ketebalan Panel	1.0–1.5 mm stainless steel tray and cabinet panels
Lebar berkesan	450–800 mm active adhesive mat width
Panjang maksimum	600–1200 mm low-profile mat length
Keluli Menghadapi Ketebalan	1.0–1.5 mm SUS304
Ketumpatan teras	900–950 kg/m³ for adhesive-film polymer backing
Kekonduksian Terma	0.35–0.45 W/(m·K) for adhesive-film polymer backing
Kemasan permukaan	Brushed SUS304 tray and cabinet with replaceable adhesive collection media
Jenis Bersatu	Removable adhesive-media tray with independently ducted filter cabinet
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Adhesive sheet or film formatSingle or dual mat-tray layoutExtraction cabinet positionPre-filter and final-filter service stages

Planning a Low-Profile Adhesive Sole Cleaner with Remote Extraction Cabinet specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami