Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Limpiador de suela adhesivo de bajo perfil con gabinete de extracción remota
A low SUS304 adhesive-mat tray paired with an independent suction-and-filtration cabinet for dry contamination-control entry areas.
- Low-profile SUS304 mat tray
- Replaceable adhesive collection media
- Separate filtered extraction cabinet
- Remote service access
Introducción del producto
This two-part entry system keeps the walking surface and extraction service equipment separate. The low-profile SUS304 tray holds replaceable adhesive collection media at the approach point, while an independently located suction-and-filtration cabinet manages extracted dust from the designated collection zone. The layout suits dry controlled entries where the service cabinet should not occupy the personnel walking surface.
Características clave
Replaceable adhesive sheets or film can be changed without moving the extraction cabinet.
The separate cabinet allows filter service away from the entry mat position.
A low threshold profile reduces the step-up at the personnel route.
The mat tray and cabinet can be positioned to suit the available entrance geometry.
Preocupaciones del producto del cliente
A dry entry may need adhesive collection at floor level while placing suction and filter servicing away from the walking line.
A raised dust-control unit disrupts a narrow personnel route.The SUS304 mat tray uses a low-profile format at the approach point.
Filter servicing beside the entry surface creates congestion.The suction-and-filtration cabinet is independent from the adhesive mat tray.
Adhesive media must be renewed without dismantling the complete entry system.The mat tray accepts replaceable adhesive media as a separate service item.
Dry areas cannot use a wet footwear-cleaning process.The system relies on dry adhesive collection and a separate extraction arrangement.
Aplicaciones típicas
Electronics cleanroom approachesDry pharmaceutical support entriesPrecision optics changing areasBattery dry-room access zonesLaboratory personnel routes
Parámetros técnicos
The tray footprint, adhesive-media format and remote cabinet placement can be selected around the dry entry layout.
| Materiales Core | SUS304 adhesive mat tray with separate SUS304 filtered extraction cabinet |
|---|---|
| Panel de espesor | 1.0–1.5 mm stainless steel tray and cabinet panels |
| Ancho efectivo | 450–800 mm active adhesive mat width |
| Longitud máxima | 600–1200 mm low-profile mat length |
| Acero frente a espesor | 1.0–1.5 mm SUS304 |
| Densidad Core | 900–950 kg/m³ for adhesive-film polymer backing |
| Conductividad térmica | 0.35–0.45 W/(m·K) for adhesive-film polymer backing |
| Superficie acabada | Brushed SUS304 tray and cabinet with replaceable adhesive collection media |
| Tipo conjunto | Removable adhesive-media tray with independently ducted filter cabinet |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Adhesive sheet or film formatSingle or dual mat-tray layoutExtraction cabinet positionPre-filter and final-filter service stages
Planning a Low-Profile Adhesive Sole Cleaner with Remote Extraction Cabinet specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
