İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Uzaktan Çıkış Dolabı ile Düşük Profil Yapışkan Tek Temizleyici
A low SUS304 adhesive-mat tray paired with an independent suction-and-filtration cabinet for dry contamination-control entry areas.
- Low-profile SUS304 mat tray
- Replaceable adhesive collection media
- Separate filtered extraction cabinet
- Remote service access
Ürün tanıtımı
This two-part entry system keeps the walking surface and extraction service equipment separate. The low-profile SUS304 tray holds replaceable adhesive collection media at the approach point, while an independently located suction-and-filtration cabinet manages extracted dust from the designated collection zone. The layout suits dry controlled entries where the service cabinet should not occupy the personnel walking surface.
Ana Özellikler
Replaceable adhesive sheets or film can be changed without moving the extraction cabinet.
The separate cabinet allows filter service away from the entry mat position.
A low threshold profile reduces the step-up at the personnel route.
The mat tray and cabinet can be positioned to suit the available entrance geometry.
Müşteri Ürün Sorunları
A dry entry may need adhesive collection at floor level while placing suction and filter servicing away from the walking line.
A raised dust-control unit disrupts a narrow personnel route.The SUS304 mat tray uses a low-profile format at the approach point.
Filter servicing beside the entry surface creates congestion.The suction-and-filtration cabinet is independent from the adhesive mat tray.
Adhesive media must be renewed without dismantling the complete entry system.The mat tray accepts replaceable adhesive media as a separate service item.
Dry areas cannot use a wet footwear-cleaning process.The system relies on dry adhesive collection and a separate extraction arrangement.
Tipik uygulamalar
Electronics cleanroom approachesDry pharmaceutical support entriesPrecision optics changing areasBattery dry-room access zonesLaboratory personnel routes
Teknik parametreler
The tray footprint, adhesive-media format and remote cabinet placement can be selected around the dry entry layout.
| Temel malzemeler | SUS304 adhesive mat tray with separate SUS304 filtered extraction cabinet |
|---|---|
| Panel kalınlığı | 1.0–1.5 mm stainless steel tray and cabinet panels |
| Effective Width (Etkili Genişlik) | 450–800 mm active adhesive mat width |
| Maksimum uzunluk | 600–1200 mm low-profile mat length |
| Çelik yüz yüze kalınlığı | 1.0–1.5 mm SUS304 |
| Core Density (Çekirdek Yoğunluğu) | 900–950 kg/m³ for adhesive-film polymer backing |
| Termal İletkenlik | 0.35–0.45 W/(m·K) for adhesive-film polymer backing |
| Yüzey bitirme | Brushed SUS304 tray and cabinet with replaceable adhesive collection media |
| Ortak tip | Removable adhesive-media tray with independently ducted filter cabinet |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Adhesive sheet or film formatSingle or dual mat-tray layoutExtraction cabinet positionPre-filter and final-filter service stages
Planning a Low-Profile Adhesive Sole Cleaner with Remote Extraction Cabinet specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
