Active low-humidity dry cabinet with three glazed door zones

Móveis de sala limpa e produtos de aço inoxidável

Gabinete seco de baixa umidade

An actively controlled steel dry cabinet that uses automatically regenerated molecular-sieve modules to maintain a stable low-humidity atmosphere around moisture-sensitive components.

Active molecular-sieve drying modules
Adjustable 1–10% RH setpoint range
Static-dissipative glazed doors
Digital humidity display and alarms

Solicite um orçamento. Browse produtos

Introdução do produto

The low-humidity dry cabinet combines a sealed powder-coated steel enclosure with twin automatically regenerated molecular-sieve drying modules. Internal air is drawn through the active modules, dried without continuous nitrogen consumption and returned through a rear distribution channel across six adjustable perforated shelves. Three independently accessed glazed door zones reduce the amount of room air introduced during retrieval. A front digital controller displays relative humidity and module status, while conductive shelf supports and a dedicated grounding stud provide a defined path for static charge from stored electronic parts and trays.

Características-chave

Alternating molecular-sieve modules regenerate automatically, allowing one drying path to remain available while the other restores its moisture capacity.

Three separate static-dissipative door zones limit humidity recovery time after a single shelf group is accessed.

A perforated rear return channel distributes dry air across the cabinet height instead of concentrating it around the drying unit.

The digital controller shows measured RH, target setting and high-humidity condition without requiring the cabinet to be opened.

Preocupações do produto do cliente

Moisture-sensitive electronic inventory needs repeatable low-RH storage without the gas consumption and access losses associated with a single large door.

Moisture-sensitive packages absorb room humidity between assembly operations.Active molecular-sieve modules continuously remove water vapor and return dry air through the rear distribution channel.

Opening one full-height door raises humidity around every stored reel and tray.Three independently gasketed glazed zones confine each access event to a smaller cabinet volume.

A saturated desiccant pack can stop protecting stock without a visible warning.Automatic regeneration and the external RH controller expose drying status and high-humidity conditions at the front panel.

Very dry air increases the static sensitivity of ungrounded component storage.Conductive shelf supports, static-dissipative glazing and an external grounding stud create a controlled discharge path.

Aplicações típicas

Moisture-sensitive semiconductor package storagePrinted circuit board stagingPrecision sensor and optical component holdingAdditive-manufacturing powder container storageElectronic assembly work-in-process protection

Parâmetros técnicos

Typical configurable specifications for an active low-humidity electronic-component cabinet are listed below.

Material principal	Powder-coated steel sealed enclosure with static-dissipative glazed doors, six conductive perforated shelves and twin regenerated molecular-sieve drying modules
Painel de espessura	1.2 mm enclosure panels, door frames and rear air-distribution channel
Largura efetiva	1200 mm overall cabinet width
Comprimento máximo	1900 mm maximum overall cabinet height
Aço enfrentando espessura	1.2 mm powder-coated carbon-steel body, doors and shelf supports
Densidade Core	7850 kg/m³ for the carbon-steel enclosure
Condutividade térmica	45–60 W/(m·K) for the carbon-steel enclosure
Superfície acabado	Light-gray cleanroom powder coat with clear static-dissipative glazing, cobalt-blue drying modules and black conductive shelves
Tipo conjunto	Seam-welded cabinet with three gasketed glazed door zones, magnetic compression closures, sealed rear circulation channel and bolted serviceable drying-module flanges
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

1–10% RH or 10–20% RH control rangesTemperature and RH data loggingReel-support or pull-out tray packagesNitrogen backup purge connection

Planning a Low-Humidity Dry Cabinet specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe