Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Cabinet sec à faible humidité
An actively controlled steel dry cabinet that uses automatically regenerated molecular-sieve modules to maintain a stable low-humidity atmosphere around moisture-sensitive components.
- Active molecular-sieve drying modules
- Adjustable 1–10% RH setpoint range
- Static-dissipative glazed doors
- Digital humidity display and alarms
Introduction de produit
The low-humidity dry cabinet combines a sealed powder-coated steel enclosure with twin automatically regenerated molecular-sieve drying modules. Internal air is drawn through the active modules, dried without continuous nitrogen consumption and returned through a rear distribution channel across six adjustable perforated shelves. Three independently accessed glazed door zones reduce the amount of room air introduced during retrieval. A front digital controller displays relative humidity and module status, while conductive shelf supports and a dedicated grounding stud provide a defined path for static charge from stored electronic parts and trays.
Key Features
Three separate static-dissipative door zones limit humidity recovery time after a single shelf group is accessed.
A perforated rear return channel distributes dry air across the cabinet height instead of concentrating it around the drying unit.
The digital controller shows measured RH, target setting and high-humidity condition without requiring the cabinet to be opened.
Préoccupations du client produit
Moisture-sensitive electronic inventory needs repeatable low-RH storage without the gas consumption and access losses associated with a single large door.
Moisture-sensitive packages absorb room humidity between assembly operations.Active molecular-sieve modules continuously remove water vapor and return dry air through the rear distribution channel.
Opening one full-height door raises humidity around every stored reel and tray.Three independently gasketed glazed zones confine each access event to a smaller cabinet volume.
A saturated desiccant pack can stop protecting stock without a visible warning.Automatic regeneration and the external RH controller expose drying status and high-humidity conditions at the front panel.
Very dry air increases the static sensitivity of ungrounded component storage.Conductive shelf supports, static-dissipative glazing and an external grounding stud create a controlled discharge path.
Les applications typiques
Moisture-sensitive semiconductor package storagePrinted circuit board stagingPrecision sensor and optical component holdingAdditive-manufacturing powder container storageElectronic assembly work-in-process protection
Paramètres techniques
Typical configurable specifications for an active low-humidity electronic-component cabinet are listed below.
| Matériaux de base | Powder-coated steel sealed enclosure with static-dissipative glazed doors, six conductive perforated shelves and twin regenerated molecular-sieve drying modules |
|---|---|
| Panneau épaisseur | 1.2 mm enclosure panels, door frames and rear air-distribution channel |
| Largeur effective | 1200 mm overall cabinet width |
| Longueur maximale | 1900 mm maximum overall cabinet height |
| Acier face épaisseur | 1.2 mm powder-coated carbon-steel body, doors and shelf supports |
| Densité Core | 7850 kg/m³ for the carbon-steel enclosure |
| Conductivité thermique | 45–60 W/(m·K) for the carbon-steel enclosure |
| surface finie | Light-gray cleanroom powder coat with clear static-dissipative glazing, cobalt-blue drying modules and black conductive shelves |
| Type joint | Seam-welded cabinet with three gasketed glazed door zones, magnetic compression closures, sealed rear circulation channel and bolted serviceable drying-module flanges |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
1–10% RH or 10–20% RH control rangesTemperature and RH data loggingReel-support or pull-out tray packagesNitrogen backup purge connection
Planning a Low-Humidity Dry Cabinet specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
