Active low-humidity dry cabinet with three glazed door zones

Perabot bilik bersih dan produk keluli tahan karat

Kabinet Kering Rendah Kelembapan

An actively controlled steel dry cabinet that uses automatically regenerated molecular-sieve modules to maintain a stable low-humidity atmosphere around moisture-sensitive components.

Active molecular-sieve drying modules
Adjustable 1–10% RH setpoint range
Static-dissipative glazed doors
Digital humidity display and alarms

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The low-humidity dry cabinet combines a sealed powder-coated steel enclosure with twin automatically regenerated molecular-sieve drying modules. Internal air is drawn through the active modules, dried without continuous nitrogen consumption and returned through a rear distribution channel across six adjustable perforated shelves. Three independently accessed glazed door zones reduce the amount of room air introduced during retrieval. A front digital controller displays relative humidity and module status, while conductive shelf supports and a dedicated grounding stud provide a defined path for static charge from stored electronic parts and trays.

Ciri-ciri Utama

Alternating molecular-sieve modules regenerate automatically, allowing one drying path to remain available while the other restores its moisture capacity.

Three separate static-dissipative door zones limit humidity recovery time after a single shelf group is accessed.

A perforated rear return channel distributes dry air across the cabinet height instead of concentrating it around the drying unit.

The digital controller shows measured RH, target setting and high-humidity condition without requiring the cabinet to be opened.

Kebimbangan Produk Pelanggan

Moisture-sensitive electronic inventory needs repeatable low-RH storage without the gas consumption and access losses associated with a single large door.

Moisture-sensitive packages absorb room humidity between assembly operations.Active molecular-sieve modules continuously remove water vapor and return dry air through the rear distribution channel.

Opening one full-height door raises humidity around every stored reel and tray.Three independently gasketed glazed zones confine each access event to a smaller cabinet volume.

A saturated desiccant pack can stop protecting stock without a visible warning.Automatic regeneration and the external RH controller expose drying status and high-humidity conditions at the front panel.

Very dry air increases the static sensitivity of ungrounded component storage.Conductive shelf supports, static-dissipative glazing and an external grounding stud create a controlled discharge path.

Permohonan yang biasa

Moisture-sensitive semiconductor package storagePrinted circuit board stagingPrecision sensor and optical component holdingAdditive-manufacturing powder container storageElectronic assembly work-in-process protection

Parameter teknikal

Typical configurable specifications for an active low-humidity electronic-component cabinet are listed below.

Bahan Teras	Powder-coated steel sealed enclosure with static-dissipative glazed doors, six conductive perforated shelves and twin regenerated molecular-sieve drying modules
Ketebalan Panel	1.2 mm enclosure panels, door frames and rear air-distribution channel
Lebar berkesan	1200 mm overall cabinet width
Panjang maksimum	1900 mm maximum overall cabinet height
Keluli Menghadapi Ketebalan	1.2 mm powder-coated carbon-steel body, doors and shelf supports
Ketumpatan teras	7850 kg/m³ for the carbon-steel enclosure
Kekonduksian Terma	45–60 W/(m·K) for the carbon-steel enclosure
Kemasan permukaan	Light-gray cleanroom powder coat with clear static-dissipative glazing, cobalt-blue drying modules and black conductive shelves
Jenis Bersatu	Seam-welded cabinet with three gasketed glazed door zones, magnetic compression closures, sealed rear circulation channel and bolted serviceable drying-module flanges
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

1–10% RH or 10–20% RH control rangesTemperature and RH data loggingReel-support or pull-out tray packagesNitrogen backup purge connection

Planning a Low-Humidity Dry Cabinet specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami