English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
خفضة الرطوبة الجاف مجلس الوزراء
An actively controlled steel dry cabinet that uses automatically regenerated molecular-sieve modules to maintain a stable low-humidity atmosphere around moisture-sensitive components.
- Active molecular-sieve drying modules
- Adjustable 1–10% RH setpoint range
- Static-dissipative glazed doors
- Digital humidity display and alarms
مقدمة المنتج
The low-humidity dry cabinet combines a sealed powder-coated steel enclosure with twin automatically regenerated molecular-sieve drying modules. Internal air is drawn through the active modules, dried without continuous nitrogen consumption and returned through a rear distribution channel across six adjustable perforated shelves. Three independently accessed glazed door zones reduce the amount of room air introduced during retrieval. A front digital controller displays relative humidity and module status, while conductive shelf supports and a dedicated grounding stud provide a defined path for static charge from stored electronic parts and trays.
الخصائص الرئيسية
Three separate static-dissipative door zones limit humidity recovery time after a single shelf group is accessed.
A perforated rear return channel distributes dry air across the cabinet height instead of concentrating it around the drying unit.
The digital controller shows measured RH, target setting and high-humidity condition without requiring the cabinet to be opened.
مخاوف المنتج للعملاء
Moisture-sensitive electronic inventory needs repeatable low-RH storage without the gas consumption and access losses associated with a single large door.
Moisture-sensitive packages absorb room humidity between assembly operations.Active molecular-sieve modules continuously remove water vapor and return dry air through the rear distribution channel.
Opening one full-height door raises humidity around every stored reel and tray.Three independently gasketed glazed zones confine each access event to a smaller cabinet volume.
A saturated desiccant pack can stop protecting stock without a visible warning.Automatic regeneration and the external RH controller expose drying status and high-humidity conditions at the front panel.
Very dry air increases the static sensitivity of ungrounded component storage.Conductive shelf supports, static-dissipative glazing and an external grounding stud create a controlled discharge path.
تطبيقات نموذجية
Moisture-sensitive semiconductor package storagePrinted circuit board stagingPrecision sensor and optical component holdingAdditive-manufacturing powder container storageElectronic assembly work-in-process protection
المعلمات الفنية
Typical configurable specifications for an active low-humidity electronic-component cabinet are listed below.
| المواد الأساسية | Powder-coated steel sealed enclosure with static-dissipative glazed doors, six conductive perforated shelves and twin regenerated molecular-sieve drying modules |
|---|---|
| سمك اللوحة | 1.2 mm enclosure panels, door frames and rear air-distribution channel |
| العرض الفعال | 1200 mm overall cabinet width |
| الحد الأقصى الطول | 1900 mm maximum overall cabinet height |
| الصلب يواجه سمك | 1.2 mm powder-coated carbon-steel body, doors and shelf supports |
| الكثافة الأساسية | 7850 kg/m³ for the carbon-steel enclosure |
| الموصلية الحرارية | 45–60 W/(m·K) for the carbon-steel enclosure |
| إنهاء السطح | Light-gray cleanroom powder coat with clear static-dissipative glazing, cobalt-blue drying modules and black conductive shelves |
| نوع المشترك | Seam-welded cabinet with three gasketed glazed door zones, magnetic compression closures, sealed rear circulation channel and bolted serviceable drying-module flanges |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
1–10% RH or 10–20% RH control rangesTemperature and RH data loggingReel-support or pull-out tray packagesNitrogen backup purge connection
Planning a Low-Humidity Dry Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
