Active low-humidity dry cabinet with three glazed door zones

클린룸 가구 및 스테인레스 스틸 제품

낮은 습도 건조 캐비닛

An actively controlled steel dry cabinet that uses automatically regenerated molecular-sieve modules to maintain a stable low-humidity atmosphere around moisture-sensitive components.

Active molecular-sieve drying modules
Adjustable 1–10% RH setpoint range
Static-dissipative glazed doors
Digital humidity display and alarms

견적 요청 제품 찾아보기

상품 소개

The low-humidity dry cabinet combines a sealed powder-coated steel enclosure with twin automatically regenerated molecular-sieve drying modules. Internal air is drawn through the active modules, dried without continuous nitrogen consumption and returned through a rear distribution channel across six adjustable perforated shelves. Three independently accessed glazed door zones reduce the amount of room air introduced during retrieval. A front digital controller displays relative humidity and module status, while conductive shelf supports and a dedicated grounding stud provide a defined path for static charge from stored electronic parts and trays.

주요 기능

Alternating molecular-sieve modules regenerate automatically, allowing one drying path to remain available while the other restores its moisture capacity.

Three separate static-dissipative door zones limit humidity recovery time after a single shelf group is accessed.

A perforated rear return channel distributes dry air across the cabinet height instead of concentrating it around the drying unit.

The digital controller shows measured RH, target setting and high-humidity condition without requiring the cabinet to be opened.

고객 제품 관심사

Moisture-sensitive electronic inventory needs repeatable low-RH storage without the gas consumption and access losses associated with a single large door.

Moisture-sensitive packages absorb room humidity between assembly operations.Active molecular-sieve modules continuously remove water vapor and return dry air through the rear distribution channel.

Opening one full-height door raises humidity around every stored reel and tray.Three independently gasketed glazed zones confine each access event to a smaller cabinet volume.

A saturated desiccant pack can stop protecting stock without a visible warning.Automatic regeneration and the external RH controller expose drying status and high-humidity conditions at the front panel.

Very dry air increases the static sensitivity of ungrounded component storage.Conductive shelf supports, static-dissipative glazing and an external grounding stud create a controlled discharge path.

일반적인 응용 프로그램

Moisture-sensitive semiconductor package storagePrinted circuit board stagingPrecision sensor and optical component holdingAdditive-manufacturing powder container storageElectronic assembly work-in-process protection

기술 매개변수

Typical configurable specifications for an active low-humidity electronic-component cabinet are listed below.

핵심 재료	Powder-coated steel sealed enclosure with static-dissipative glazed doors, six conductive perforated shelves and twin regenerated molecular-sieve drying modules
패널 두께	1.2 mm enclosure panels, door frames and rear air-distribution channel
유효 폭	1200 mm overall cabinet width
최대 길이	1900 mm maximum overall cabinet height
강철 면면 두께	1.2 mm powder-coated carbon-steel body, doors and shelf supports
코어 밀도	7850 kg/m³ for the carbon-steel enclosure
열전도도 (Thermal Conductivity)	45–60 W/(m·K) for the carbon-steel enclosure
표면 마무리	Light-gray cleanroom powder coat with clear static-dissipative glazing, cobalt-blue drying modules and black conductive shelves
접합 유형	Seam-welded cabinet with three gasketed glazed door zones, magnetic compression closures, sealed rear circulation channel and bolted serviceable drying-module flanges
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

1–10% RH or 10–20% RH control rangesTemperature and RH data loggingReel-support or pull-out tray packagesNitrogen backup purge connection

Planning a Low-Humidity Dry Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.