Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Iluminação de sala limpa e equipamentos elétricos
Explosão Proof Cleanroom Light
A heavy-duty sealed LED fixture that combines hazardous-area enclosure principles with a smooth exterior suitable for controlled-room cleaning.
- Robust Metal Enclosure
- Protected Cable Hub
- Impact-Resistant Lens
- Cleanable External Geometry
Introdução do produto
The explosion-protected cleanroom luminaire encloses the LED driver and connection terminals within a robust cast or fabricated metal body. A thick glass or impact-resistant lens is retained by a bolted sealed frame, and incoming power passes through a matching threaded hub. The room-facing surfaces are simplified and coated or stainless so the fixture can be cleaned without exposing flame-path or electrical joints.
Características-chave
Threaded cable hubs maintain the intended protection at each wiring entry.
The retained lens frame resists accidental opening during cleaning.
External cooling fins are minimized or positioned away from the primary wipe face.
Color-coded terminals and a separate wiring chamber simplify controlled servicing.
Preocupações do produto do cliente
Hazardous-area protection and cleanability can conflict when deep cooling fins, open glands or rough castings face the controlled room.
A general industrial Ex light has deep fins that are difficult to sanitize.The selected cleanroom configuration presents a simplified smooth room-facing enclosure.
An unmatched cable gland compromises the protected connection chamber.Threaded entries use glands selected for the cable and enclosure arrangement.
Thin lens frames distort when bolts are tightened unevenly.A rigid retained frame distributes clamping load around the thick optical window.
Maintenance can mix power wiring with the optical chamber.A segregated terminal compartment limits access to the connection area.
Aplicações típicas
Solvent-handling cleanroomsHazardous compounding suitesBattery manufacturing dry roomsFine-chemical controlled areas
Parâmetros técnicos
Typical configurable construction ranges for an explosion-proof cleanroom LED luminaire are listed below.
| Material principal | Copper-free aluminum or stainless enclosure with LED engine, protected driver chamber and tempered-glass lens |
|---|---|
| Painel de espessura | 110-220 mm complete enclosure depth |
| Largura efetiva | 180-420 mm exposed fixture width |
| Comprimento máximo | Up to 1400 mm complete luminaire length |
| Aço enfrentando espessura | 2.0-4.0 mm stainless fabricated body where selected |
| Densidade Core | Approximately 2700 kg/m³ for copper-free aluminum housing material |
| Condutividade térmica | 150-200 W/(m·K) for the aluminum enclosure |
| Superfície acabado | White or light-grey chemical-resistant coating, or fine-brushed stainless exterior |
| Tipo conjunto | Bolted gasketed lens frame with segregated terminal chamber and threaded protected cable hubs |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Linear or compact low-bay formCast aluminum or stainless constructionCeiling or wall mounting bracketsEmergency battery enclosure
Planning a Explosion-Proof Cleanroom Light specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
