Explosion-proof cleanroom LED luminaire with robust light-grey metal housing

Освещение и электрическое оборудование в чистых помещениях

Взрывозащитный свет чистой комнаты

A heavy-duty sealed LED fixture that combines hazardous-area enclosure principles with a smooth exterior suitable for controlled-room cleaning.

Robust Metal Enclosure
Protected Cable Hub
Impact-Resistant Lens
Cleanable External Geometry

Запрос котировки Просмотреть продукты

Введение продукции

The explosion-protected cleanroom luminaire encloses the LED driver and connection terminals within a robust cast or fabricated metal body. A thick glass or impact-resistant lens is retained by a bolted sealed frame, and incoming power passes through a matching threaded hub. The room-facing surfaces are simplified and coated or stainless so the fixture can be cleaned without exposing flame-path or electrical joints.

Основные характеристики

A rigid metal body protects the driver and terminal chamber from impact and enclosure distortion.

Threaded cable hubs maintain the intended protection at each wiring entry.

The retained lens frame resists accidental opening during cleaning.

External cooling fins are minimized or positioned away from the primary wipe face.

Color-coded terminals and a separate wiring chamber simplify controlled servicing.

Обеспокоенность клиентов продуктами

Hazardous-area protection and cleanability can conflict when deep cooling fins, open glands or rough castings face the controlled room.

A general industrial Ex light has deep fins that are difficult to sanitize.The selected cleanroom configuration presents a simplified smooth room-facing enclosure.

An unmatched cable gland compromises the protected connection chamber.Threaded entries use glands selected for the cable and enclosure arrangement.

Thin lens frames distort when bolts are tightened unevenly.A rigid retained frame distributes clamping load around the thick optical window.

Maintenance can mix power wiring with the optical chamber.A segregated terminal compartment limits access to the connection area.

Типичные приложения

Solvent-handling cleanroomsHazardous compounding suitesBattery manufacturing dry roomsFine-chemical controlled areas

Технические параметры

Typical configurable construction ranges for an explosion-proof cleanroom LED luminaire are listed below.

Основной материал	Copper-free aluminum or stainless enclosure with LED engine, protected driver chamber and tempered-glass lens
Толщина панели	110-220 mm complete enclosure depth
эффективная ширина	180-420 mm exposed fixture width
Максимальная длина	Up to 1400 mm complete luminaire length
Толщина линий стали	2.0-4.0 mm stainless fabricated body where selected
Плотность ядра	Approximately 2700 kg/m³ for copper-free aluminum housing material
Теплопроводимость	150-200 W/(m·K) for the aluminum enclosure
Поверхностная отделка	White or light-grey chemical-resistant coating, or fine-brushed stainless exterior
Объединенный тип	Bolted gasketed lens frame with segregated terminal chamber and threaded protected cable hubs
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Linear or compact low-bay formCast aluminum or stainless constructionCeiling or wall mounting bracketsEmergency battery enclosure

Planning a Explosion-Proof Cleanroom Light specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой