İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Patlamaya dayanıklı temiz oda ışığı
A heavy-duty sealed LED fixture that combines hazardous-area enclosure principles with a smooth exterior suitable for controlled-room cleaning.
- Robust Metal Enclosure
- Protected Cable Hub
- Impact-Resistant Lens
- Cleanable External Geometry
Ürün tanıtımı
The explosion-protected cleanroom luminaire encloses the LED driver and connection terminals within a robust cast or fabricated metal body. A thick glass or impact-resistant lens is retained by a bolted sealed frame, and incoming power passes through a matching threaded hub. The room-facing surfaces are simplified and coated or stainless so the fixture can be cleaned without exposing flame-path or electrical joints.
Ana Özellikler
Threaded cable hubs maintain the intended protection at each wiring entry.
The retained lens frame resists accidental opening during cleaning.
External cooling fins are minimized or positioned away from the primary wipe face.
Color-coded terminals and a separate wiring chamber simplify controlled servicing.
Müşteri Ürün Sorunları
Hazardous-area protection and cleanability can conflict when deep cooling fins, open glands or rough castings face the controlled room.
A general industrial Ex light has deep fins that are difficult to sanitize.The selected cleanroom configuration presents a simplified smooth room-facing enclosure.
An unmatched cable gland compromises the protected connection chamber.Threaded entries use glands selected for the cable and enclosure arrangement.
Thin lens frames distort when bolts are tightened unevenly.A rigid retained frame distributes clamping load around the thick optical window.
Maintenance can mix power wiring with the optical chamber.A segregated terminal compartment limits access to the connection area.
Tipik uygulamalar
Solvent-handling cleanroomsHazardous compounding suitesBattery manufacturing dry roomsFine-chemical controlled areas
Teknik parametreler
Typical configurable construction ranges for an explosion-proof cleanroom LED luminaire are listed below.
| Temel malzemeler | Copper-free aluminum or stainless enclosure with LED engine, protected driver chamber and tempered-glass lens |
|---|---|
| Panel kalınlığı | 110-220 mm complete enclosure depth |
| Effective Width (Etkili Genişlik) | 180-420 mm exposed fixture width |
| Maksimum uzunluk | Up to 1400 mm complete luminaire length |
| Çelik yüz yüze kalınlığı | 2.0-4.0 mm stainless fabricated body where selected |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2700 kg/m³ for copper-free aluminum housing material |
| Termal İletkenlik | 150-200 W/(m·K) for the aluminum enclosure |
| Yüzey bitirme | White or light-grey chemical-resistant coating, or fine-brushed stainless exterior |
| Ortak tip | Bolted gasketed lens frame with segregated terminal chamber and threaded protected cable hubs |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Linear or compact low-bay formCast aluminum or stainless constructionCeiling or wall mounting bracketsEmergency battery enclosure
Planning a Explosion-Proof Cleanroom Light specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
