Explosion-proof cleanroom LED luminaire with robust light-grey metal housing

クリーンルーム照明 · 電気機器

防爆クリーンルームライト

A heavy-duty sealed LED fixture that combines hazardous-area enclosure principles with a smooth exterior suitable for controlled-room cleaning.

Robust Metal Enclosure
Protected Cable Hub
Impact-Resistant Lens
Cleanable External Geometry

見積もりリクエスト製品案内

商品紹介

The explosion-protected cleanroom luminaire encloses the LED driver and connection terminals within a robust cast or fabricated metal body. A thick glass or impact-resistant lens is retained by a bolted sealed frame, and incoming power passes through a matching threaded hub. The room-facing surfaces are simplified and coated or stainless so the fixture can be cleaned without exposing flame-path or electrical joints.

主要な特徴

A rigid metal body protects the driver and terminal chamber from impact and enclosure distortion.

Threaded cable hubs maintain the intended protection at each wiring entry.

The retained lens frame resists accidental opening during cleaning.

External cooling fins are minimized or positioned away from the primary wipe face.

Color-coded terminals and a separate wiring chamber simplify controlled servicing.

お客様の製品に関する懸念事項

Hazardous-area protection and cleanability can conflict when deep cooling fins, open glands or rough castings face the controlled room.

A general industrial Ex light has deep fins that are difficult to sanitize.The selected cleanroom configuration presents a simplified smooth room-facing enclosure.

An unmatched cable gland compromises the protected connection chamber.Threaded entries use glands selected for the cable and enclosure arrangement.

Thin lens frames distort when bolts are tightened unevenly.A rigid retained frame distributes clamping load around the thick optical window.

Maintenance can mix power wiring with the optical chamber.A segregated terminal compartment limits access to the connection area.

典型的な用途

Solvent-handling cleanroomsHazardous compounding suitesBattery manufacturing dry roomsFine-chemical controlled areas

技術的なパラメータ

Typical configurable construction ranges for an explosion-proof cleanroom LED luminaire are listed below.

コア材料	Copper-free aluminum or stainless enclosure with LED engine, protected driver chamber and tempered-glass lens
パネルの厚さ	110-220 mm complete enclosure depth
有効幅	180-420 mm exposed fixture width
最大長さ	Up to 1400 mm complete luminaire length
鋼鉄の厚さを直面する	2.0-4.0 mm stainless fabricated body where selected
コア密度	Approximately 2700 kg/m³ for copper-free aluminum housing material
熱伝導率	150-200 W/(m·K) for the aluminum enclosure
表面仕上げ	White or light-grey chemical-resistant coating, or fine-brushed stainless exterior
ジョイントタイプ	Bolted gasketed lens frame with segregated terminal chamber and threaded protected cable hubs
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Linear or compact low-bay formCast aluminum or stainless constructionCeiling or wall mounting bracketsEmergency battery enclosure

Planning a Explosion-Proof Cleanroom Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する