Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Explosion-proof Cleanroom Lumière
A heavy-duty sealed LED fixture that combines hazardous-area enclosure principles with a smooth exterior suitable for controlled-room cleaning.
- Robust Metal Enclosure
- Protected Cable Hub
- Impact-Resistant Lens
- Cleanable External Geometry
Introduction de produit
The explosion-protected cleanroom luminaire encloses the LED driver and connection terminals within a robust cast or fabricated metal body. A thick glass or impact-resistant lens is retained by a bolted sealed frame, and incoming power passes through a matching threaded hub. The room-facing surfaces are simplified and coated or stainless so the fixture can be cleaned without exposing flame-path or electrical joints.
Key Features
Threaded cable hubs maintain the intended protection at each wiring entry.
The retained lens frame resists accidental opening during cleaning.
External cooling fins are minimized or positioned away from the primary wipe face.
Color-coded terminals and a separate wiring chamber simplify controlled servicing.
Préoccupations du client produit
Hazardous-area protection and cleanability can conflict when deep cooling fins, open glands or rough castings face the controlled room.
A general industrial Ex light has deep fins that are difficult to sanitize.The selected cleanroom configuration presents a simplified smooth room-facing enclosure.
An unmatched cable gland compromises the protected connection chamber.Threaded entries use glands selected for the cable and enclosure arrangement.
Thin lens frames distort when bolts are tightened unevenly.A rigid retained frame distributes clamping load around the thick optical window.
Maintenance can mix power wiring with the optical chamber.A segregated terminal compartment limits access to the connection area.
Les applications typiques
Solvent-handling cleanroomsHazardous compounding suitesBattery manufacturing dry roomsFine-chemical controlled areas
Paramètres techniques
Typical configurable construction ranges for an explosion-proof cleanroom LED luminaire are listed below.
| Matériaux de base | Copper-free aluminum or stainless enclosure with LED engine, protected driver chamber and tempered-glass lens |
|---|---|
| Panneau épaisseur | 110-220 mm complete enclosure depth |
| Largeur effective | 180-420 mm exposed fixture width |
| Longueur maximale | Up to 1400 mm complete luminaire length |
| Acier face épaisseur | 2.0-4.0 mm stainless fabricated body where selected |
| Densité Core | Approximately 2700 kg/m³ for copper-free aluminum housing material |
| Conductivité thermique | 150-200 W/(m·K) for the aluminum enclosure |
| surface finie | White or light-grey chemical-resistant coating, or fine-brushed stainless exterior |
| Type joint | Bolted gasketed lens frame with segregated terminal chamber and threaded protected cable hubs |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Linear or compact low-bay formCast aluminum or stainless constructionCeiling or wall mounting bracketsEmergency battery enclosure
Planning a Explosion-Proof Cleanroom Light specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
