English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
ضوء غرفة نظيفة مقاومة للانفجار
A heavy-duty sealed LED fixture that combines hazardous-area enclosure principles with a smooth exterior suitable for controlled-room cleaning.
- Robust Metal Enclosure
- Protected Cable Hub
- Impact-Resistant Lens
- Cleanable External Geometry
مقدمة المنتج
The explosion-protected cleanroom luminaire encloses the LED driver and connection terminals within a robust cast or fabricated metal body. A thick glass or impact-resistant lens is retained by a bolted sealed frame, and incoming power passes through a matching threaded hub. The room-facing surfaces are simplified and coated or stainless so the fixture can be cleaned without exposing flame-path or electrical joints.
الخصائص الرئيسية
Threaded cable hubs maintain the intended protection at each wiring entry.
The retained lens frame resists accidental opening during cleaning.
External cooling fins are minimized or positioned away from the primary wipe face.
Color-coded terminals and a separate wiring chamber simplify controlled servicing.
مخاوف المنتج للعملاء
Hazardous-area protection and cleanability can conflict when deep cooling fins, open glands or rough castings face the controlled room.
A general industrial Ex light has deep fins that are difficult to sanitize.The selected cleanroom configuration presents a simplified smooth room-facing enclosure.
An unmatched cable gland compromises the protected connection chamber.Threaded entries use glands selected for the cable and enclosure arrangement.
Thin lens frames distort when bolts are tightened unevenly.A rigid retained frame distributes clamping load around the thick optical window.
Maintenance can mix power wiring with the optical chamber.A segregated terminal compartment limits access to the connection area.
تطبيقات نموذجية
Solvent-handling cleanroomsHazardous compounding suitesBattery manufacturing dry roomsFine-chemical controlled areas
المعلمات الفنية
Typical configurable construction ranges for an explosion-proof cleanroom LED luminaire are listed below.
| المواد الأساسية | Copper-free aluminum or stainless enclosure with LED engine, protected driver chamber and tempered-glass lens |
|---|---|
| سمك اللوحة | 110-220 mm complete enclosure depth |
| العرض الفعال | 180-420 mm exposed fixture width |
| الحد الأقصى الطول | Up to 1400 mm complete luminaire length |
| الصلب يواجه سمك | 2.0-4.0 mm stainless fabricated body where selected |
| الكثافة الأساسية | Approximately 2700 kg/m³ for copper-free aluminum housing material |
| الموصلية الحرارية | 150-200 W/(m·K) for the aluminum enclosure |
| إنهاء السطح | White or light-grey chemical-resistant coating, or fine-brushed stainless exterior |
| نوع المشترك | Bolted gasketed lens frame with segregated terminal chamber and threaded protected cable hubs |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Linear or compact low-bay formCast aluminum or stainless constructionCeiling or wall mounting bracketsEmergency battery enclosure
Planning a Explosion-Proof Cleanroom Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
