Blue-top ESD cleanroom workbench with grounded accessory rail

Móveis de sala limpa e produtos de aço inoxidável

Z ESD Workbench

A groundable cleanroom workstation with a static-dissipative surface and managed grounding points for sensitive electronic assembly.

Static-dissipative work surface
Common-point ground module
Conductive frame continuity
ESD-safe accessory system

Solicite um orçamento. Browse produtos

Introdução do produto

The ESD workbench creates a controlled discharge path from the operator, work surface and bench accessories to a verified common ground. A dissipative laminate or rubber work layer prevents rapid discharge while a conductive metal frame maintains electrical continuity. Ground studs, wrist-strap terminals and optional monitor points are positioned away from the active assembly surface. Smooth sealed edges and low-shedding cable channels retain cleanroom compatibility.

Características-chave

A dissipative work layer drains charge at a controlled rate instead of producing a sudden spark.

A clearly identified common-point ground connects the top, frame and operator accessories in one location.

Conductive shelves and bins can be bonded to the bench rather than forming isolated charged objects.

Enclosed power distribution keeps mains wiring separate from grounding leads and the product zone.

Preocupações do produto do cliente

Sensitive components can be damaged by charges on the operator, work surface or accessories even when the room itself is clean.

Grounding only the operator leaves trays and the work surface electrically isolated.A bonded frame and surface connect all workstation elements to the same common ground.

Highly conductive metal surfaces can discharge too rapidly into exposed devices.The dissipative work layer limits current while still removing accumulated charge.

Unlabelled grounding cords are disconnected during bench rearrangement.Dedicated colour-coded terminals keep protective earth and operator connections identifiable.

Ordinary plastic drawers and shelves accumulate charge beside components.Compatible dissipative bins and grounded metal accessories extend control beyond the tabletop.

Aplicações típicas

Semiconductor device assemblyPCB inspection and repairSensor productionMedical electronics manufacturingOptoelectronic packaging

Parâmetros técnicos

Typical configurable specifications for an ESD cleanroom workbench are listed below.

Material principal	High-pressure laminate or conductive rubber ESD surface over a rigid composite core
Painel de espessura	20–30 mm worktop assembly
Largura efetiva	600–900 mm work surface depth
Comprimento máximo	2400 mm
Aço enfrentando espessura	1.0–1.5 mm powder-coated or stainless frame panels
Densidade Core	650–850 kg/m³ for reinforced composite worktop core
Condutividade térmica	0.15–0.30 W/(m·K) for composite worktop assembly
Superfície acabado	Blue or light-grey static-dissipative matte work surface with sealed edges
Tipo conjunto	Bonded conductive frame with common-point ground and replaceable ESD top layer
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Continuous resistance monitorWrist-strap and footwear tester portsConductive shelves and binsHeight-adjustable grounded frame

Planning a ESD Workbench specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe