English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
ESD منضدة العمل
A groundable cleanroom workstation with a static-dissipative surface and managed grounding points for sensitive electronic assembly.
- Static-dissipative work surface
- Common-point ground module
- Conductive frame continuity
- ESD-safe accessory system
مقدمة المنتج
The ESD workbench creates a controlled discharge path from the operator, work surface and bench accessories to a verified common ground. A dissipative laminate or rubber work layer prevents rapid discharge while a conductive metal frame maintains electrical continuity. Ground studs, wrist-strap terminals and optional monitor points are positioned away from the active assembly surface. Smooth sealed edges and low-shedding cable channels retain cleanroom compatibility.
الخصائص الرئيسية
A clearly identified common-point ground connects the top, frame and operator accessories in one location.
Conductive shelves and bins can be bonded to the bench rather than forming isolated charged objects.
Enclosed power distribution keeps mains wiring separate from grounding leads and the product zone.
مخاوف المنتج للعملاء
Sensitive components can be damaged by charges on the operator, work surface or accessories even when the room itself is clean.
Grounding only the operator leaves trays and the work surface electrically isolated.A bonded frame and surface connect all workstation elements to the same common ground.
Highly conductive metal surfaces can discharge too rapidly into exposed devices.The dissipative work layer limits current while still removing accumulated charge.
Unlabelled grounding cords are disconnected during bench rearrangement.Dedicated colour-coded terminals keep protective earth and operator connections identifiable.
Ordinary plastic drawers and shelves accumulate charge beside components.Compatible dissipative bins and grounded metal accessories extend control beyond the tabletop.
تطبيقات نموذجية
Semiconductor device assemblyPCB inspection and repairSensor productionMedical electronics manufacturingOptoelectronic packaging
المعلمات الفنية
Typical configurable specifications for an ESD cleanroom workbench are listed below.
| المواد الأساسية | High-pressure laminate or conductive rubber ESD surface over a rigid composite core |
|---|---|
| سمك اللوحة | 20–30 mm worktop assembly |
| العرض الفعال | 600–900 mm work surface depth |
| الحد الأقصى الطول | 2400 mm |
| الصلب يواجه سمك | 1.0–1.5 mm powder-coated or stainless frame panels |
| الكثافة الأساسية | 650–850 kg/m³ for reinforced composite worktop core |
| الموصلية الحرارية | 0.15–0.30 W/(m·K) for composite worktop assembly |
| إنهاء السطح | Blue or light-grey static-dissipative matte work surface with sealed edges |
| نوع المشترك | Bonded conductive frame with common-point ground and replaceable ESD top layer |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Continuous resistance monitorWrist-strap and footwear tester portsConductive shelves and binsHeight-adjustable grounded frame
Planning a ESD Workbench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
