Blue-top ESD cleanroom workbench with grounded accessory rail

Мебель для чистых комнат и изделия из нержавеющей стали

Рабочая группа по ОУП

A groundable cleanroom workstation with a static-dissipative surface and managed grounding points for sensitive electronic assembly.

Static-dissipative work surface
Common-point ground module
Conductive frame continuity
ESD-safe accessory system

Запрос котировки Просмотреть продукты

Введение продукции

The ESD workbench creates a controlled discharge path from the operator, work surface and bench accessories to a verified common ground. A dissipative laminate or rubber work layer prevents rapid discharge while a conductive metal frame maintains electrical continuity. Ground studs, wrist-strap terminals and optional monitor points are positioned away from the active assembly surface. Smooth sealed edges and low-shedding cable channels retain cleanroom compatibility.

Основные характеристики

A dissipative work layer drains charge at a controlled rate instead of producing a sudden spark.

A clearly identified common-point ground connects the top, frame and operator accessories in one location.

Conductive shelves and bins can be bonded to the bench rather than forming isolated charged objects.

Enclosed power distribution keeps mains wiring separate from grounding leads and the product zone.

Обеспокоенность клиентов продуктами

Sensitive components can be damaged by charges on the operator, work surface or accessories even when the room itself is clean.

Grounding only the operator leaves trays and the work surface electrically isolated.A bonded frame and surface connect all workstation elements to the same common ground.

Highly conductive metal surfaces can discharge too rapidly into exposed devices.The dissipative work layer limits current while still removing accumulated charge.

Unlabelled grounding cords are disconnected during bench rearrangement.Dedicated colour-coded terminals keep protective earth and operator connections identifiable.

Ordinary plastic drawers and shelves accumulate charge beside components.Compatible dissipative bins and grounded metal accessories extend control beyond the tabletop.

Типичные приложения

Semiconductor device assemblyPCB inspection and repairSensor productionMedical electronics manufacturingOptoelectronic packaging

Технические параметры

Typical configurable specifications for an ESD cleanroom workbench are listed below.

Основной материал	High-pressure laminate or conductive rubber ESD surface over a rigid composite core
Толщина панели	20–30 mm worktop assembly
эффективная ширина	600–900 mm work surface depth
Максимальная длина	2400 mm
Толщина линий стали	1.0–1.5 mm powder-coated or stainless frame panels
Плотность ядра	650–850 kg/m³ for reinforced composite worktop core
Теплопроводимость	0.15–0.30 W/(m·K) for composite worktop assembly
Поверхностная отделка	Blue or light-grey static-dissipative matte work surface with sealed edges
Объединенный тип	Bonded conductive frame with common-point ground and replaceable ESD top layer
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Continuous resistance monitorWrist-strap and footwear tester portsConductive shelves and binsHeight-adjustable grounded frame

Planning a ESD Workbench specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой