Blue-top ESD cleanroom workbench with grounded accessory rail

クリーンルーム家具 · ステンレス製品

ESD ワークベンチ

A groundable cleanroom workstation with a static-dissipative surface and managed grounding points for sensitive electronic assembly.

Static-dissipative work surface
Common-point ground module
Conductive frame continuity
ESD-safe accessory system

見積もりリクエスト製品案内

商品紹介

The ESD workbench creates a controlled discharge path from the operator, work surface and bench accessories to a verified common ground. A dissipative laminate or rubber work layer prevents rapid discharge while a conductive metal frame maintains electrical continuity. Ground studs, wrist-strap terminals and optional monitor points are positioned away from the active assembly surface. Smooth sealed edges and low-shedding cable channels retain cleanroom compatibility.

主要な特徴

A dissipative work layer drains charge at a controlled rate instead of producing a sudden spark.

A clearly identified common-point ground connects the top, frame and operator accessories in one location.

Conductive shelves and bins can be bonded to the bench rather than forming isolated charged objects.

Enclosed power distribution keeps mains wiring separate from grounding leads and the product zone.

お客様の製品に関する懸念事項

Sensitive components can be damaged by charges on the operator, work surface or accessories even when the room itself is clean.

Grounding only the operator leaves trays and the work surface electrically isolated.A bonded frame and surface connect all workstation elements to the same common ground.

Highly conductive metal surfaces can discharge too rapidly into exposed devices.The dissipative work layer limits current while still removing accumulated charge.

Unlabelled grounding cords are disconnected during bench rearrangement.Dedicated colour-coded terminals keep protective earth and operator connections identifiable.

Ordinary plastic drawers and shelves accumulate charge beside components.Compatible dissipative bins and grounded metal accessories extend control beyond the tabletop.

典型的な用途

Semiconductor device assemblyPCB inspection and repairSensor productionMedical electronics manufacturingOptoelectronic packaging

技術的なパラメータ

Typical configurable specifications for an ESD cleanroom workbench are listed below.

コア材料	High-pressure laminate or conductive rubber ESD surface over a rigid composite core
パネルの厚さ	20–30 mm worktop assembly
有効幅	600–900 mm work surface depth
最大長さ	2400 mm
鋼鉄の厚さを直面する	1.0–1.5 mm powder-coated or stainless frame panels
コア密度	650–850 kg/m³ for reinforced composite worktop core
熱伝導率	0.15–0.30 W/(m·K) for composite worktop assembly
表面仕上げ	Blue or light-grey static-dissipative matte work surface with sealed edges
ジョイントタイプ	Bonded conductive frame with common-point ground and replaceable ESD top layer
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Continuous resistance monitorWrist-strap and footwear tester portsConductive shelves and binsHeight-adjustable grounded frame

Planning a ESD Workbench specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する