Blue-top ESD cleanroom workbench with grounded accessory rail

Cleanroom Furniture dan Produk Stainless Steel

ESD Workbench

A groundable cleanroom workstation with a static-dissipative surface and managed grounding points for sensitive electronic assembly.

Static-dissipative work surface
Common-point ground module
Conductive frame continuity
ESD-safe accessory system

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The ESD workbench creates a controlled discharge path from the operator, work surface and bench accessories to a verified common ground. A dissipative laminate or rubber work layer prevents rapid discharge while a conductive metal frame maintains electrical continuity. Ground studs, wrist-strap terminals and optional monitor points are positioned away from the active assembly surface. Smooth sealed edges and low-shedding cable channels retain cleanroom compatibility.

Fitur utama:

A dissipative work layer drains charge at a controlled rate instead of producing a sudden spark.

A clearly identified common-point ground connects the top, frame and operator accessories in one location.

Conductive shelves and bins can be bonded to the bench rather than forming isolated charged objects.

Enclosed power distribution keeps mains wiring separate from grounding leads and the product zone.

Kekhawatiran produk pelanggan

Sensitive components can be damaged by charges on the operator, work surface or accessories even when the room itself is clean.

Grounding only the operator leaves trays and the work surface electrically isolated.A bonded frame and surface connect all workstation elements to the same common ground.

Highly conductive metal surfaces can discharge too rapidly into exposed devices.The dissipative work layer limits current while still removing accumulated charge.

Unlabelled grounding cords are disconnected during bench rearrangement.Dedicated colour-coded terminals keep protective earth and operator connections identifiable.

Ordinary plastic drawers and shelves accumulate charge beside components.Compatible dissipative bins and grounded metal accessories extend control beyond the tabletop.

Aplikasi yang Tipis

Semiconductor device assemblyPCB inspection and repairSensor productionMedical electronics manufacturingOptoelectronic packaging

Parameter teknis

Typical configurable specifications for an ESD cleanroom workbench are listed below.

Bahan inti	High-pressure laminate or conductive rubber ESD surface over a rigid composite core
Ketebalan Panel (Panel Thickness)	20–30 mm worktop assembly
Efektif lebar	600–900 mm work surface depth
Panjang maksimum	2400 mm (sempurna)
Baja menghadap ketebalan	1.0–1.5 mm powder-coated or stainless frame panels
Kepadatan inti (core density)	650–850 kg/m³ for reinforced composite worktop core
Konduktivitas Termal (Thermal Conductivity)	0.15–0.30 W/(m·K) for composite worktop assembly
Permukaan selesai	Blue or light-grey static-dissipative matte work surface with sealed edges
Jenis Bersama	Bonded conductive frame with common-point ground and replaceable ESD top layer
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Continuous resistance monitorWrist-strap and footwear tester portsConductive shelves and binsHeight-adjustable grounded frame

Planning a ESD Workbench specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami