Blue-top ESD cleanroom workbench with grounded accessory rail

Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri

ESD Workbench

A groundable cleanroom workstation with a static-dissipative surface and managed grounding points for sensitive electronic assembly.

Static-dissipative work surface
Common-point ground module
Conductive frame continuity
ESD-safe accessory system

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The ESD workbench creates a controlled discharge path from the operator, work surface and bench accessories to a verified common ground. A dissipative laminate or rubber work layer prevents rapid discharge while a conductive metal frame maintains electrical continuity. Ground studs, wrist-strap terminals and optional monitor points are positioned away from the active assembly surface. Smooth sealed edges and low-shedding cable channels retain cleanroom compatibility.

Ana Özellikler

A dissipative work layer drains charge at a controlled rate instead of producing a sudden spark.

A clearly identified common-point ground connects the top, frame and operator accessories in one location.

Conductive shelves and bins can be bonded to the bench rather than forming isolated charged objects.

Enclosed power distribution keeps mains wiring separate from grounding leads and the product zone.

Müşteri Ürün Sorunları

Sensitive components can be damaged by charges on the operator, work surface or accessories even when the room itself is clean.

Grounding only the operator leaves trays and the work surface electrically isolated.A bonded frame and surface connect all workstation elements to the same common ground.

Highly conductive metal surfaces can discharge too rapidly into exposed devices.The dissipative work layer limits current while still removing accumulated charge.

Unlabelled grounding cords are disconnected during bench rearrangement.Dedicated colour-coded terminals keep protective earth and operator connections identifiable.

Ordinary plastic drawers and shelves accumulate charge beside components.Compatible dissipative bins and grounded metal accessories extend control beyond the tabletop.

Tipik uygulamalar

Semiconductor device assemblyPCB inspection and repairSensor productionMedical electronics manufacturingOptoelectronic packaging

Teknik parametreler

Typical configurable specifications for an ESD cleanroom workbench are listed below.

Temel malzemeler	High-pressure laminate or conductive rubber ESD surface over a rigid composite core
Panel kalınlığı	20–30 mm worktop assembly
Effective Width (Etkili Genişlik)	600–900 mm work surface depth
Maksimum uzunluk	2400 mm
Çelik yüz yüze kalınlığı	1.0–1.5 mm powder-coated or stainless frame panels
Core Density (Çekirdek Yoğunluğu)	650–850 kg/m³ for reinforced composite worktop core
Termal İletkenlik	0.15–0.30 W/(m·K) for composite worktop assembly
Yüzey bitirme	Blue or light-grey static-dissipative matte work surface with sealed edges
Ortak tip	Bonded conductive frame with common-point ground and replaceable ESD top layer
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Continuous resistance monitorWrist-strap and footwear tester portsConductive shelves and binsHeight-adjustable grounded frame

Planning a ESD Workbench specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun