Cytotoxic containment isolator with negative-pressure glove chamber

Fluxo laminar e equipamentos de contenção

Z Isolador de contenção citotóxica

A negative-pressure glovebox that contains cytotoxic and other hazardous drug preparation through sealed manipulation, transfer and waste paths.

Negative-Pressure Hazardous Drug Chamber
Closed Glove Manipulation
Staged Exhaust Filtration
Contained Waste Egress

Solicite um orçamento. Browse produtos

Introdução do produto

The cytotoxic isolator encloses hazardous drug manipulation inside a negative-pressure stainless chamber. Glove ports provide operator access, while an interlocked transfer chamber introduces materials without opening the main work zone. Exhaust air passes through staged high-efficiency filtration, and sharps, liquid and solid waste can leave through dedicated closed connections. The pressure and airflow arrangement prioritize personnel and environmental containment while maintaining a clean work zone for the product.

Características-chave

Negative pressure keeps leakage direction inward toward the filtered exhaust.

Glove manipulation separates the operator from hazardous drug aerosols and residues.

Staged exhaust filters provide redundant particulate retention.

A sealed transfer chamber limits direct room-to-work-zone openings.

Dedicated sharps and bag-out interfaces keep waste within closed routes.

Preocupações do produto do cliente

Hazardous drug work requires the work chamber, transfer route and waste system to maintain containment through the complete compounding cycle.

Waste containers leave the chamber through the clean supply route.Separate sharps, liquid and bag-out ports create dedicated egress paths.

A glove puncture weakens the primary barrier.Replaceable glove rings and integrity-test connections support routine barrier management.

Filter service exposes concentrated hazardous residue.Contained filter-change housings isolate loaded exhaust stages.

Pressure becomes positive during exhaust failure.Pressure monitoring and exhaust interlocks alarm or stop operation when containment is lost.

Aplicações típicas

Cytotoxic drug compoundingAntineoplastic preparationHazardous sterile admixturesOncology pharmacy manipulation

Parâmetros técnicos

Typical configurable construction ranges for a cytotoxic containment isolator are listed below.

Material principal	Welded SUS316L negative-pressure chamber with laminated glass, CSM gloves and staged safe-change exhaust filters
Painel de espessura	50-100 mm double-skin chamber and exhaust sections
Largura efetiva	1200-3000 mm usable compounding width
Comprimento máximo	Up to 4500 mm overall isolator length
Aço enfrentando espessura	2.0-3.0 mm SUS316L chamber; 1.2-1.5 mm service skins
Densidade Core	Approximately 8000 kg/m³ for SUS316L chamber material
Condutividade térmica	14-16 W/(m·K) for austenitic stainless steel
Superfície acabado	Electropolished SUS316L interior with welded spill-retaining lower pan
Tipo conjunto	Pressure-tight welded chamber with sealed glove rings, gasketed transfer hatch and contained exhaust-filter collars
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Two to four glove positionsSharps and liquid waste portsBag-out solid-waste systemIntegrated glove integrity tester

Planning a Cytotoxic Containment Isolator specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe