Cytotoxic containment isolator with negative-pressure glove chamber

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

세포독성 격리제 (Cytotoxic Containment Isolator)

A negative-pressure glovebox that contains cytotoxic and other hazardous drug preparation through sealed manipulation, transfer and waste paths.

Negative-Pressure Hazardous Drug Chamber
Closed Glove Manipulation
Staged Exhaust Filtration
Contained Waste Egress

견적 요청 제품 찾아보기

상품 소개

The cytotoxic isolator encloses hazardous drug manipulation inside a negative-pressure stainless chamber. Glove ports provide operator access, while an interlocked transfer chamber introduces materials without opening the main work zone. Exhaust air passes through staged high-efficiency filtration, and sharps, liquid and solid waste can leave through dedicated closed connections. The pressure and airflow arrangement prioritize personnel and environmental containment while maintaining a clean work zone for the product.

주요 기능

Negative pressure keeps leakage direction inward toward the filtered exhaust.

Glove manipulation separates the operator from hazardous drug aerosols and residues.

Staged exhaust filters provide redundant particulate retention.

A sealed transfer chamber limits direct room-to-work-zone openings.

Dedicated sharps and bag-out interfaces keep waste within closed routes.

고객 제품 관심사

Hazardous drug work requires the work chamber, transfer route and waste system to maintain containment through the complete compounding cycle.

Waste containers leave the chamber through the clean supply route.Separate sharps, liquid and bag-out ports create dedicated egress paths.

A glove puncture weakens the primary barrier.Replaceable glove rings and integrity-test connections support routine barrier management.

Filter service exposes concentrated hazardous residue.Contained filter-change housings isolate loaded exhaust stages.

Pressure becomes positive during exhaust failure.Pressure monitoring and exhaust interlocks alarm or stop operation when containment is lost.

일반적인 응용 프로그램

Cytotoxic drug compoundingAntineoplastic preparationHazardous sterile admixturesOncology pharmacy manipulation

기술 매개변수

Typical configurable construction ranges for a cytotoxic containment isolator are listed below.

핵심 재료	Welded SUS316L negative-pressure chamber with laminated glass, CSM gloves and staged safe-change exhaust filters
패널 두께	50-100 mm double-skin chamber and exhaust sections
유효 폭	1200-3000 mm usable compounding width
최대 길이	Up to 4500 mm overall isolator length
강철 면면 두께	2.0-3.0 mm SUS316L chamber; 1.2-1.5 mm service skins
코어 밀도	Approximately 8000 kg/m³ for SUS316L chamber material
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished SUS316L interior with welded spill-retaining lower pan
접합 유형	Pressure-tight welded chamber with sealed glove rings, gasketed transfer hatch and contained exhaust-filter collars
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two to four glove positionsSharps and liquid waste portsBag-out solid-waste systemIntegrated glove integrity tester

Planning a Cytotoxic Containment Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.