English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Цитотоксический изолятор сдерживания
A negative-pressure glovebox that contains cytotoxic and other hazardous drug preparation through sealed manipulation, transfer and waste paths.
- Negative-Pressure Hazardous Drug Chamber
- Closed Glove Manipulation
- Staged Exhaust Filtration
- Contained Waste Egress
Введение продукции
The cytotoxic isolator encloses hazardous drug manipulation inside a negative-pressure stainless chamber. Glove ports provide operator access, while an interlocked transfer chamber introduces materials without opening the main work zone. Exhaust air passes through staged high-efficiency filtration, and sharps, liquid and solid waste can leave through dedicated closed connections. The pressure and airflow arrangement prioritize personnel and environmental containment while maintaining a clean work zone for the product.
Основные характеристики
Glove manipulation separates the operator from hazardous drug aerosols and residues.
Staged exhaust filters provide redundant particulate retention.
A sealed transfer chamber limits direct room-to-work-zone openings.
Dedicated sharps and bag-out interfaces keep waste within closed routes.
Обеспокоенность клиентов продуктами
Hazardous drug work requires the work chamber, transfer route and waste system to maintain containment through the complete compounding cycle.
Waste containers leave the chamber through the clean supply route.Separate sharps, liquid and bag-out ports create dedicated egress paths.
A glove puncture weakens the primary barrier.Replaceable glove rings and integrity-test connections support routine barrier management.
Filter service exposes concentrated hazardous residue.Contained filter-change housings isolate loaded exhaust stages.
Pressure becomes positive during exhaust failure.Pressure monitoring and exhaust interlocks alarm or stop operation when containment is lost.
Типичные приложения
Cytotoxic drug compoundingAntineoplastic preparationHazardous sterile admixturesOncology pharmacy manipulation
Технические параметры
Typical configurable construction ranges for a cytotoxic containment isolator are listed below.
| Основной материал | Welded SUS316L negative-pressure chamber with laminated glass, CSM gloves and staged safe-change exhaust filters |
|---|---|
| Толщина панели | 50-100 mm double-skin chamber and exhaust sections |
| эффективная ширина | 1200-3000 mm usable compounding width |
| Максимальная длина | Up to 4500 mm overall isolator length |
| Толщина линий стали | 2.0-3.0 mm SUS316L chamber; 1.2-1.5 mm service skins |
| Плотность ядра | Approximately 8000 kg/m³ for SUS316L chamber material |
| Теплопроводимость | 14-16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Electropolished SUS316L interior with welded spill-retaining lower pan |
| Объединенный тип | Pressure-tight welded chamber with sealed glove rings, gasketed transfer hatch and contained exhaust-filter collars |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Two to four glove positionsSharps and liquid waste portsBag-out solid-waste systemIntegrated glove integrity tester
Planning a Cytotoxic Containment Isolator specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
