Cytotoxic containment isolator with negative-pressure glove chamber

層流 · 封じ込め装置

細胞毒性封じ込めアイソレータ

A negative-pressure glovebox that contains cytotoxic and other hazardous drug preparation through sealed manipulation, transfer and waste paths.

Negative-Pressure Hazardous Drug Chamber
Closed Glove Manipulation
Staged Exhaust Filtration
Contained Waste Egress

見積もりリクエスト製品案内

商品紹介

The cytotoxic isolator encloses hazardous drug manipulation inside a negative-pressure stainless chamber. Glove ports provide operator access, while an interlocked transfer chamber introduces materials without opening the main work zone. Exhaust air passes through staged high-efficiency filtration, and sharps, liquid and solid waste can leave through dedicated closed connections. The pressure and airflow arrangement prioritize personnel and environmental containment while maintaining a clean work zone for the product.

主要な特徴

Negative pressure keeps leakage direction inward toward the filtered exhaust.

Glove manipulation separates the operator from hazardous drug aerosols and residues.

Staged exhaust filters provide redundant particulate retention.

A sealed transfer chamber limits direct room-to-work-zone openings.

Dedicated sharps and bag-out interfaces keep waste within closed routes.

お客様の製品に関する懸念事項

Hazardous drug work requires the work chamber, transfer route and waste system to maintain containment through the complete compounding cycle.

Waste containers leave the chamber through the clean supply route.Separate sharps, liquid and bag-out ports create dedicated egress paths.

A glove puncture weakens the primary barrier.Replaceable glove rings and integrity-test connections support routine barrier management.

Filter service exposes concentrated hazardous residue.Contained filter-change housings isolate loaded exhaust stages.

Pressure becomes positive during exhaust failure.Pressure monitoring and exhaust interlocks alarm or stop operation when containment is lost.

典型的な用途

Cytotoxic drug compoundingAntineoplastic preparationHazardous sterile admixturesOncology pharmacy manipulation

技術的なパラメータ

Typical configurable construction ranges for a cytotoxic containment isolator are listed below.

コア材料	Welded SUS316L negative-pressure chamber with laminated glass, CSM gloves and staged safe-change exhaust filters
パネルの厚さ	50-100 mm double-skin chamber and exhaust sections
有効幅	1200-3000 mm usable compounding width
最大長さ	Up to 4500 mm overall isolator length
鋼鉄の厚さを直面する	2.0-3.0 mm SUS316L chamber; 1.2-1.5 mm service skins
コア密度	Approximately 8000 kg/m³ for SUS316L chamber material
熱伝導率	14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Electropolished SUS316L interior with welded spill-retaining lower pan
ジョイントタイプ	Pressure-tight welded chamber with sealed glove rings, gasketed transfer hatch and contained exhaust-filter collars
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Two to four glove positionsSharps and liquid waste portsBag-out solid-waste systemIntegrated glove integrity tester

Planning a Cytotoxic Containment Isolator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する