English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
Cytotoxic احتواء عازل
A negative-pressure glovebox that contains cytotoxic and other hazardous drug preparation through sealed manipulation, transfer and waste paths.
- Negative-Pressure Hazardous Drug Chamber
- Closed Glove Manipulation
- Staged Exhaust Filtration
- Contained Waste Egress
مقدمة المنتج
The cytotoxic isolator encloses hazardous drug manipulation inside a negative-pressure stainless chamber. Glove ports provide operator access, while an interlocked transfer chamber introduces materials without opening the main work zone. Exhaust air passes through staged high-efficiency filtration, and sharps, liquid and solid waste can leave through dedicated closed connections. The pressure and airflow arrangement prioritize personnel and environmental containment while maintaining a clean work zone for the product.
الخصائص الرئيسية
Glove manipulation separates the operator from hazardous drug aerosols and residues.
Staged exhaust filters provide redundant particulate retention.
A sealed transfer chamber limits direct room-to-work-zone openings.
Dedicated sharps and bag-out interfaces keep waste within closed routes.
مخاوف المنتج للعملاء
Hazardous drug work requires the work chamber, transfer route and waste system to maintain containment through the complete compounding cycle.
Waste containers leave the chamber through the clean supply route.Separate sharps, liquid and bag-out ports create dedicated egress paths.
A glove puncture weakens the primary barrier.Replaceable glove rings and integrity-test connections support routine barrier management.
Filter service exposes concentrated hazardous residue.Contained filter-change housings isolate loaded exhaust stages.
Pressure becomes positive during exhaust failure.Pressure monitoring and exhaust interlocks alarm or stop operation when containment is lost.
تطبيقات نموذجية
Cytotoxic drug compoundingAntineoplastic preparationHazardous sterile admixturesOncology pharmacy manipulation
المعلمات الفنية
Typical configurable construction ranges for a cytotoxic containment isolator are listed below.
| المواد الأساسية | Welded SUS316L negative-pressure chamber with laminated glass, CSM gloves and staged safe-change exhaust filters |
|---|---|
| سمك اللوحة | 50-100 mm double-skin chamber and exhaust sections |
| العرض الفعال | 1200-3000 mm usable compounding width |
| الحد الأقصى الطول | Up to 4500 mm overall isolator length |
| الصلب يواجه سمك | 2.0-3.0 mm SUS316L chamber; 1.2-1.5 mm service skins |
| الكثافة الأساسية | Approximately 8000 kg/m³ for SUS316L chamber material |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Electropolished SUS316L interior with welded spill-retaining lower pan |
| نوع المشترك | Pressure-tight welded chamber with sealed glove rings, gasketed transfer hatch and contained exhaust-filter collars |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Two to four glove positionsSharps and liquid waste portsBag-out solid-waste systemIntegrated glove integrity tester
Planning a Cytotoxic Containment Isolator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
