Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Cleanroom U-Channel Edge Trim (em inglês)
An extruded aluminum U-channel used to close exposed cleanroom panel ends, retain wall or ceiling modules and form straight, sealable junctions around openings and perimeter edges.
- 6063-T5 Aluminum
- Panel Edge Protection
- Straight Sealed Termination
- 50–100 mm Panel Fit
Introdução do produto
Cleanroom U-Channel Edge Trim is a rigid 6063-T5 aluminum extrusion sized to cap the end of a modular wall or ceiling panel. It protects exposed panel skins and core material, keeps the termination straight and supplies a controlled line for hygienic sealant. Common internal widths match 50, 75 and 100 mm panel systems, while anodized or white powder-coated finishes coordinate with the cleanroom envelope. The profile is useful at wall ends, ceiling perimeters, framed openings and selected T-junctions where a simple, durable closure is preferred to a multi-part trim.
Características-chave
6063-T5 aluminum combines dimensional accuracy with practical corrosion resistance indoors.
A straight extrusion creates a consistent perimeter line for silicone or gasket sealing.
Standard channel widths match widely used 50, 75 and 100 mm modular panel systems.
Anodized and powder-coated finishes avoid an unfinished metallic edge in the clean area.
Preocupações do produto do cliente
Edge closures must protect the panel core, remain straight over long runs and leave a surface that can be sealed and wiped without exposed fasteners.
An exposed sandwich-panel core can shed particles or absorb cleaning moisture.The full-depth channel encloses both skins and the open core edge behind a sealed aluminum face.
A loose termination lets the panel end move and crack the sealant line.A correctly sized internal channel width grips the panel and distributes restraint along the edge.
Uneven cut edges remain visible beside doors, windows or equipment openings.The straight extrusion masks minor edge variation and establishes a uniform finished reveal.
Bare or rough metal edges are difficult to clean safely.Smooth anodized or powder-coated aluminum presents a closed, wipeable perimeter surface.
Aplicações típicas
Cleanroom wall end closuresCeiling perimeter terminationsPanel-to-opening edge trimsT-junction panel restraintsService aperture perimeter finishing
Parâmetros técnicos
The following ranges represent common extruded U-channel edge trims for modular cleanroom panel systems.
| Material principal | Solid 6063-T5 extruded aluminum; no cellular core |
|---|---|
| Painel de espessura | 1.0–1.5 mm profile wall thickness |
| Largura efetiva | 50, 75 or 100 mm internal channel width |
| Comprimento máximo | 6000 mm |
| Aço enfrentando espessura | N/A — aluminum edge trim has no steel facing |
| Densidade Core | N/A — solid aluminum extrusion |
| Condutividade térmica | N/A — not specified as an insulating panel |
| Superfície acabado | Clear anodized or polyester powder-coated aluminum |
| Tipo conjunto | Slip-fit U-channel with adhesive, concealed fasteners and perimeter sealant |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
50, 75 and 100 mm internal widthsWhite powder-coated finishClear anodized finishPre-cut lengths and corner mitres
Planning a Cleanroom U-Channel Edge Trim specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
