Complete cleanroom aluminum U-channel edge trim

クリーンルームの壁と天井システム

クリーンルーム U チャンネルエッジトリム

An extruded aluminum U-channel used to close exposed cleanroom panel ends, retain wall or ceiling modules and form straight, sealable junctions around openings and perimeter edges.

6063-T5 Aluminum
Panel Edge Protection
Straight Sealed Termination
50–100 mm Panel Fit

見積もりリクエスト製品案内

商品紹介

Cleanroom U-Channel Edge Trim is a rigid 6063-T5 aluminum extrusion sized to cap the end of a modular wall or ceiling panel. It protects exposed panel skins and core material, keeps the termination straight and supplies a controlled line for hygienic sealant. Common internal widths match 50, 75 and 100 mm panel systems, while anodized or white powder-coated finishes coordinate with the cleanroom envelope. The profile is useful at wall ends, ceiling perimeters, framed openings and selected T-junctions where a simple, durable closure is preferred to a multi-part trim.

主要な特徴

The U-shaped section captures both panel faces and shields the core from direct contact.

6063-T5 aluminum combines dimensional accuracy with practical corrosion resistance indoors.

A straight extrusion creates a consistent perimeter line for silicone or gasket sealing.

Standard channel widths match widely used 50, 75 and 100 mm modular panel systems.

Anodized and powder-coated finishes avoid an unfinished metallic edge in the clean area.

お客様の製品に関する懸念事項

Edge closures must protect the panel core, remain straight over long runs and leave a surface that can be sealed and wiped without exposed fasteners.

An exposed sandwich-panel core can shed particles or absorb cleaning moisture.The full-depth channel encloses both skins and the open core edge behind a sealed aluminum face.

A loose termination lets the panel end move and crack the sealant line.A correctly sized internal channel width grips the panel and distributes restraint along the edge.

Uneven cut edges remain visible beside doors, windows or equipment openings.The straight extrusion masks minor edge variation and establishes a uniform finished reveal.

Bare or rough metal edges are difficult to clean safely.Smooth anodized or powder-coated aluminum presents a closed, wipeable perimeter surface.

典型的な用途

Cleanroom wall end closuresCeiling perimeter terminationsPanel-to-opening edge trimsT-junction panel restraintsService aperture perimeter finishing

技術的なパラメータ

The following ranges represent common extruded U-channel edge trims for modular cleanroom panel systems.

コア材料	Solid 6063-T5 extruded aluminum; no cellular core
パネルの厚さ	1.0–1.5 mm profile wall thickness
有効幅	50, 75 or 100 mm internal channel width
最大長さ	6000 mm
鋼鉄の厚さを直面する	N/A — aluminum edge trim has no steel facing
コア密度	N/A — solid aluminum extrusion
熱伝導率	N / A— 絶縁パネルとして指定されていない
表面仕上げ	Clear anodized or polyester powder-coated aluminum
ジョイントタイプ	Slip-fit U-channel with adhesive, concealed fasteners and perimeter sealant
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

50, 75 and 100 mm internal widthsWhite powder-coated finishClear anodized finishPre-cut lengths and corner mitres

Planning a Cleanroom U-Channel Edge Trim specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する