İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Duvar ve Tavan Sistemleri
Temiz Oda U Kanal Kenar Trim
An extruded aluminum U-channel used to close exposed cleanroom panel ends, retain wall or ceiling modules and form straight, sealable junctions around openings and perimeter edges.
- 6063-T5 Aluminum
- Panel Edge Protection
- Straight Sealed Termination
- 50–100 mm Panel Fit
Ürün tanıtımı
Cleanroom U-Channel Edge Trim is a rigid 6063-T5 aluminum extrusion sized to cap the end of a modular wall or ceiling panel. It protects exposed panel skins and core material, keeps the termination straight and supplies a controlled line for hygienic sealant. Common internal widths match 50, 75 and 100 mm panel systems, while anodized or white powder-coated finishes coordinate with the cleanroom envelope. The profile is useful at wall ends, ceiling perimeters, framed openings and selected T-junctions where a simple, durable closure is preferred to a multi-part trim.
Ana Özellikler
6063-T5 aluminum combines dimensional accuracy with practical corrosion resistance indoors.
A straight extrusion creates a consistent perimeter line for silicone or gasket sealing.
Standard channel widths match widely used 50, 75 and 100 mm modular panel systems.
Anodized and powder-coated finishes avoid an unfinished metallic edge in the clean area.
Müşteri Ürün Sorunları
Edge closures must protect the panel core, remain straight over long runs and leave a surface that can be sealed and wiped without exposed fasteners.
An exposed sandwich-panel core can shed particles or absorb cleaning moisture.The full-depth channel encloses both skins and the open core edge behind a sealed aluminum face.
A loose termination lets the panel end move and crack the sealant line.A correctly sized internal channel width grips the panel and distributes restraint along the edge.
Uneven cut edges remain visible beside doors, windows or equipment openings.The straight extrusion masks minor edge variation and establishes a uniform finished reveal.
Bare or rough metal edges are difficult to clean safely.Smooth anodized or powder-coated aluminum presents a closed, wipeable perimeter surface.
Tipik uygulamalar
Cleanroom wall end closuresCeiling perimeter terminationsPanel-to-opening edge trimsT-junction panel restraintsService aperture perimeter finishing
Teknik parametreler
The following ranges represent common extruded U-channel edge trims for modular cleanroom panel systems.
| Temel malzemeler | Solid 6063-T5 extruded aluminum; no cellular core |
|---|---|
| Panel kalınlığı | 1.0–1.5 mm profile wall thickness |
| Effective Width (Etkili Genişlik) | 50, 75 or 100 mm internal channel width |
| Maksimum uzunluk | 6000 mm |
| Çelik yüz yüze kalınlığı | N/A — aluminum edge trim has no steel facing |
| Core Density (Çekirdek Yoğunluğu) | N/A — solid aluminum extrusion |
| Termal İletkenlik | N/A — not specified as an insulating panel |
| Yüzey bitirme | Clear anodized or polyester powder-coated aluminum |
| Ortak tip | Slip-fit U-channel with adhesive, concealed fasteners and perimeter sealant |
| Customization (Özelleşme) | Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir |
Mevcut Seçenekler
50, 75 and 100 mm internal widthsWhite powder-coated finishClear anodized finishPre-cut lengths and corner mitres
Planning a Cleanroom U-Channel Edge Trim specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
