Complete cleanroom aluminum U-channel edge trim

클린룸 벽 및 천장 시스템

클린룸 U 채널 모서리 트림

An extruded aluminum U-channel used to close exposed cleanroom panel ends, retain wall or ceiling modules and form straight, sealable junctions around openings and perimeter edges.

6063-T5 Aluminum
Panel Edge Protection
Straight Sealed Termination
50–100 mm Panel Fit

견적 요청 제품 찾아보기

상품 소개

Cleanroom U-Channel Edge Trim is a rigid 6063-T5 aluminum extrusion sized to cap the end of a modular wall or ceiling panel. It protects exposed panel skins and core material, keeps the termination straight and supplies a controlled line for hygienic sealant. Common internal widths match 50, 75 and 100 mm panel systems, while anodized or white powder-coated finishes coordinate with the cleanroom envelope. The profile is useful at wall ends, ceiling perimeters, framed openings and selected T-junctions where a simple, durable closure is preferred to a multi-part trim.

주요 기능

The U-shaped section captures both panel faces and shields the core from direct contact.

6063-T5 aluminum combines dimensional accuracy with practical corrosion resistance indoors.

A straight extrusion creates a consistent perimeter line for silicone or gasket sealing.

Standard channel widths match widely used 50, 75 and 100 mm modular panel systems.

Anodized and powder-coated finishes avoid an unfinished metallic edge in the clean area.

고객 제품 관심사

Edge closures must protect the panel core, remain straight over long runs and leave a surface that can be sealed and wiped without exposed fasteners.

An exposed sandwich-panel core can shed particles or absorb cleaning moisture.The full-depth channel encloses both skins and the open core edge behind a sealed aluminum face.

A loose termination lets the panel end move and crack the sealant line.A correctly sized internal channel width grips the panel and distributes restraint along the edge.

Uneven cut edges remain visible beside doors, windows or equipment openings.The straight extrusion masks minor edge variation and establishes a uniform finished reveal.

Bare or rough metal edges are difficult to clean safely.Smooth anodized or powder-coated aluminum presents a closed, wipeable perimeter surface.

일반적인 응용 프로그램

Cleanroom wall end closuresCeiling perimeter terminationsPanel-to-opening edge trimsT-junction panel restraintsService aperture perimeter finishing

기술 매개변수

The following ranges represent common extruded U-channel edge trims for modular cleanroom panel systems.

핵심 재료	Solid 6063-T5 extruded aluminum; no cellular core
패널 두께	1.0–1.5 mm profile wall thickness
유효 폭	50, 75 or 100 mm internal channel width
최대 길이	6000 mm
강철 면면 두께	N/A — aluminum edge trim has no steel facing
코어 밀도	N/A — solid aluminum extrusion
열전도도 (Thermal Conductivity)	N/A — not specified as an insulating panel
표면 마무리	Clear anodized or polyester powder-coated aluminum
접합 유형	Slip-fit U-channel with adhesive, concealed fasteners and perimeter sealant
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

50, 75 and 100 mm internal widthsWhite powder-coated finishClear anodized finishPre-cut lengths and corner mitres

Planning a Cleanroom U-Channel Edge Trim specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.