English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
Cleanroom U-Channel Edge Trim
An extruded aluminum U-channel used to close exposed cleanroom panel ends, retain wall or ceiling modules and form straight, sealable junctions around openings and perimeter edges.
- 6063-T5 Aluminum
- Panel Edge Protection
- Straight Sealed Termination
- 50–100 mm Panel Fit
مقدمة المنتج
Cleanroom U-Channel Edge Trim is a rigid 6063-T5 aluminum extrusion sized to cap the end of a modular wall or ceiling panel. It protects exposed panel skins and core material, keeps the termination straight and supplies a controlled line for hygienic sealant. Common internal widths match 50, 75 and 100 mm panel systems, while anodized or white powder-coated finishes coordinate with the cleanroom envelope. The profile is useful at wall ends, ceiling perimeters, framed openings and selected T-junctions where a simple, durable closure is preferred to a multi-part trim.
الخصائص الرئيسية
6063-T5 aluminum combines dimensional accuracy with practical corrosion resistance indoors.
A straight extrusion creates a consistent perimeter line for silicone or gasket sealing.
Standard channel widths match widely used 50, 75 and 100 mm modular panel systems.
Anodized and powder-coated finishes avoid an unfinished metallic edge in the clean area.
مخاوف المنتج للعملاء
Edge closures must protect the panel core, remain straight over long runs and leave a surface that can be sealed and wiped without exposed fasteners.
An exposed sandwich-panel core can shed particles or absorb cleaning moisture.The full-depth channel encloses both skins and the open core edge behind a sealed aluminum face.
A loose termination lets the panel end move and crack the sealant line.A correctly sized internal channel width grips the panel and distributes restraint along the edge.
Uneven cut edges remain visible beside doors, windows or equipment openings.The straight extrusion masks minor edge variation and establishes a uniform finished reveal.
Bare or rough metal edges are difficult to clean safely.Smooth anodized or powder-coated aluminum presents a closed, wipeable perimeter surface.
تطبيقات نموذجية
Cleanroom wall end closuresCeiling perimeter terminationsPanel-to-opening edge trimsT-junction panel restraintsService aperture perimeter finishing
المعلمات الفنية
The following ranges represent common extruded U-channel edge trims for modular cleanroom panel systems.
| المواد الأساسية | Solid 6063-T5 extruded aluminum; no cellular core |
|---|---|
| سمك اللوحة | 1.0–1.5 mm profile wall thickness |
| العرض الفعال | 50, 75 or 100 mm internal channel width |
| الحد الأقصى الطول | 6000 mm |
| الصلب يواجه سمك | N/A — aluminum edge trim has no steel facing |
| الكثافة الأساسية | N/A — solid aluminum extrusion |
| الموصلية الحرارية | N/A — not specified as an insulating panel |
| إنهاء السطح | Clear anodized or polyester powder-coated aluminum |
| نوع المشترك | Slip-fit U-channel with adhesive, concealed fasteners and perimeter sealant |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
50, 75 and 100 mm internal widthsWhite powder-coated finishClear anodized finishPre-cut lengths and corner mitres
Planning a Cleanroom U-Channel Edge Trim specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
