English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
U-Channel Edge Trim для чистой комнаты
An extruded aluminum U-channel used to close exposed cleanroom panel ends, retain wall or ceiling modules and form straight, sealable junctions around openings and perimeter edges.
- 6063-T5 Aluminum
- Panel Edge Protection
- Straight Sealed Termination
- 50–100 mm Panel Fit
Введение продукции
Cleanroom U-Channel Edge Trim is a rigid 6063-T5 aluminum extrusion sized to cap the end of a modular wall or ceiling panel. It protects exposed panel skins and core material, keeps the termination straight and supplies a controlled line for hygienic sealant. Common internal widths match 50, 75 and 100 mm panel systems, while anodized or white powder-coated finishes coordinate with the cleanroom envelope. The profile is useful at wall ends, ceiling perimeters, framed openings and selected T-junctions where a simple, durable closure is preferred to a multi-part trim.
Основные характеристики
6063-T5 aluminum combines dimensional accuracy with practical corrosion resistance indoors.
A straight extrusion creates a consistent perimeter line for silicone or gasket sealing.
Standard channel widths match widely used 50, 75 and 100 mm modular panel systems.
Anodized and powder-coated finishes avoid an unfinished metallic edge in the clean area.
Обеспокоенность клиентов продуктами
Edge closures must protect the panel core, remain straight over long runs and leave a surface that can be sealed and wiped without exposed fasteners.
An exposed sandwich-panel core can shed particles or absorb cleaning moisture.The full-depth channel encloses both skins and the open core edge behind a sealed aluminum face.
A loose termination lets the panel end move and crack the sealant line.A correctly sized internal channel width grips the panel and distributes restraint along the edge.
Uneven cut edges remain visible beside doors, windows or equipment openings.The straight extrusion masks minor edge variation and establishes a uniform finished reveal.
Bare or rough metal edges are difficult to clean safely.Smooth anodized or powder-coated aluminum presents a closed, wipeable perimeter surface.
Типичные приложения
Cleanroom wall end closuresCeiling perimeter terminationsPanel-to-opening edge trimsT-junction panel restraintsService aperture perimeter finishing
Технические параметры
The following ranges represent common extruded U-channel edge trims for modular cleanroom panel systems.
| Основной материал | Solid 6063-T5 extruded aluminum; no cellular core |
|---|---|
| Толщина панели | 1.0–1.5 mm profile wall thickness |
| эффективная ширина | 50, 75 or 100 mm internal channel width |
| Максимальная длина | 6000 mm |
| Толщина линий стали | N/A — aluminum edge trim has no steel facing |
| Плотность ядра | N/A — solid aluminum extrusion |
| Теплопроводимость | N/A — not specified as an insulating panel |
| Поверхностная отделка | Clear anodized or polyester powder-coated aluminum |
| Объединенный тип | Slip-fit U-channel with adhesive, concealed fasteners and perimeter sealant |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
50, 75 and 100 mm internal widthsWhite powder-coated finishClear anodized finishPre-cut lengths and corner mitres
Planning a Cleanroom U-Channel Edge Trim specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
