Wide cleanroom material airlock with stainless lower-wall impact rails

Equipamento de descontaminação de pessoal e materiais

Material de sala limpa Airlock

A wide, reinforced airlock for moving carts, racks and production equipment between controlled cleanroom zones.

Cart and rack clearance
Reinforced flush floor
Wide interlocked doors
Impact-protected lower walls

Introdução do produto

The Cleanroom Material Airlock is sized around rolling loads rather than individual pedestrian traffic. Wide door openings, a flush reinforced floor and lower-wall impact protection help accommodate carts, racks and equipment movement. The interlocked door sequence controls the transfer boundary, while configurable supply, return or purge connections can support recovery of the intended air condition after large door openings.

Características-chave

A level reinforced floor supports wheeled transfers across the airlock threshold.

Lower-wall bumper rails protect finished panels from routine cart contact.

Wide openings can be matched to the equipment envelope and transfer route.

Door-zone sensing can confirm that a load is clear before the next release.

Purge and pressure-equalisation provisions can be incorporated into the enclosure layout.

Preocupações do produto do cliente

Large rolling loads occupy doors longer and create different structural and airflow demands from a personnel-only entrance.

Raised thresholds interrupt pallet-jack and cart movement.A continuous reinforced floor provides a level route through the airlock.

Carts strike cleanroom panels and exposed devices.Bumper rails and recessed hardware protect the enclosure surfaces.

A large door opening changes the air condition before the clean-side door releases.The enclosure can include purge timing and pressure-monitoring connections suited to the HVAC design.

A parked load prevents a door from closing completely.Optional position sensing can hold the sequence until both doorway zones are clear.

Aplicações típicas

Pharmaceutical equipment transferClean cart routesSemiconductor production racksBattery material stagingMedical manufacturing tool movement

Parâmetros técnicos

Material-airlock dimensions are determined by the largest rolling load, clear door opening and the intended cleanroom pressure arrangement.

Material principal	High-density polyurethane insulated reinforced cleanroom panels
Painel de espessura	75–100 mm
Largura efetiva	1500–3000 mm clear opening
Comprimento máximo	3000–8000 mm airlock length
Aço enfrentando espessura	1,0 - 1,5 mm
Densidade Core	40–45 kg/m³
Condutividade térmica	0.022–0.030 W/(m·K)
Superfície acabado	Brushed stainless lower walls with powder-coated cleanroom panels above
Tipo conjunto	Reinforced sealed panel joints with wide monitored interlocked doors
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

High-speed or hinged doorsAGV interface pointsCeiling purge moduleAdditional forklift guard rails

Planning a Cleanroom Material Airlock specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe