Wide cleanroom material airlock with stainless lower-wall impact rails

Персонал и оборудование для дезактивации материалов

Материалы для чистых помещений Airlock

A wide, reinforced airlock for moving carts, racks and production equipment between controlled cleanroom zones.

Cart and rack clearance
Reinforced flush floor
Wide interlocked doors
Impact-protected lower walls

Введение продукции

The Cleanroom Material Airlock is sized around rolling loads rather than individual pedestrian traffic. Wide door openings, a flush reinforced floor and lower-wall impact protection help accommodate carts, racks and equipment movement. The interlocked door sequence controls the transfer boundary, while configurable supply, return or purge connections can support recovery of the intended air condition after large door openings.

Основные характеристики

A level reinforced floor supports wheeled transfers across the airlock threshold.

Lower-wall bumper rails protect finished panels from routine cart contact.

Wide openings can be matched to the equipment envelope and transfer route.

Door-zone sensing can confirm that a load is clear before the next release.

Purge and pressure-equalisation provisions can be incorporated into the enclosure layout.

Обеспокоенность клиентов продуктами

Large rolling loads occupy doors longer and create different structural and airflow demands from a personnel-only entrance.

Raised thresholds interrupt pallet-jack and cart movement.A continuous reinforced floor provides a level route through the airlock.

Carts strike cleanroom panels and exposed devices.Bumper rails and recessed hardware protect the enclosure surfaces.

A large door opening changes the air condition before the clean-side door releases.The enclosure can include purge timing and pressure-monitoring connections suited to the HVAC design.

A parked load prevents a door from closing completely.Optional position sensing can hold the sequence until both doorway zones are clear.

Типичные приложения

Pharmaceutical equipment transferClean cart routesSemiconductor production racksBattery material stagingMedical manufacturing tool movement

Технические параметры

Material-airlock dimensions are determined by the largest rolling load, clear door opening and the intended cleanroom pressure arrangement.

Основной материал	High-density polyurethane insulated reinforced cleanroom panels
Толщина панели	75–100 mm
эффективная ширина	1500–3000 mm clear opening
Максимальная длина	3000–8000 mm airlock length
Толщина линий стали	1.0–1.5 mm
Плотность ядра	40–45 kg/m³
Теплопроводимость	0.022–0.030 W/(m·K)
Поверхностная отделка	Brushed stainless lower walls with powder-coated cleanroom panels above
Объединенный тип	Reinforced sealed panel joints with wide monitored interlocked doors
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

High-speed or hinged doorsAGV interface pointsCeiling purge moduleAdditional forklift guard rails

Planning a Cleanroom Material Airlock specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой