Wide cleanroom material airlock with stainless lower-wall impact rails

Personel ve Malzeme Dekontaminasyon Ekipmanları

Temiz Oda Malzemesi Airlock

A wide, reinforced airlock for moving carts, racks and production equipment between controlled cleanroom zones.

Cart and rack clearance
Reinforced flush floor
Wide interlocked doors
Impact-protected lower walls

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Cleanroom Material Airlock is sized around rolling loads rather than individual pedestrian traffic. Wide door openings, a flush reinforced floor and lower-wall impact protection help accommodate carts, racks and equipment movement. The interlocked door sequence controls the transfer boundary, while configurable supply, return or purge connections can support recovery of the intended air condition after large door openings.

Ana Özellikler

A level reinforced floor supports wheeled transfers across the airlock threshold.

Lower-wall bumper rails protect finished panels from routine cart contact.

Wide openings can be matched to the equipment envelope and transfer route.

Door-zone sensing can confirm that a load is clear before the next release.

Purge and pressure-equalisation provisions can be incorporated into the enclosure layout.

Müşteri Ürün Sorunları

Large rolling loads occupy doors longer and create different structural and airflow demands from a personnel-only entrance.

Raised thresholds interrupt pallet-jack and cart movement.A continuous reinforced floor provides a level route through the airlock.

Carts strike cleanroom panels and exposed devices.Bumper rails and recessed hardware protect the enclosure surfaces.

A large door opening changes the air condition before the clean-side door releases.The enclosure can include purge timing and pressure-monitoring connections suited to the HVAC design.

A parked load prevents a door from closing completely.Optional position sensing can hold the sequence until both doorway zones are clear.

Tipik uygulamalar

Pharmaceutical equipment transferClean cart routesSemiconductor production racksBattery material stagingMedical manufacturing tool movement

Teknik parametreler

Material-airlock dimensions are determined by the largest rolling load, clear door opening and the intended cleanroom pressure arrangement.

Temel malzemeler	High-density polyurethane insulated reinforced cleanroom panels
Panel kalınlığı	75–100 mm
Effective Width (Etkili Genişlik)	1500–3000 mm clear opening
Maksimum uzunluk	3000–8000 mm airlock length
Çelik yüz yüze kalınlığı	1,0-1.5 mm
Core Density (Çekirdek Yoğunluğu)	40–45 kg/m³
Termal İletkenlik	0.022–0.030 W/(m·K)
Yüzey bitirme	Brushed stainless lower walls with powder-coated cleanroom panels above
Ortak tip	Reinforced sealed panel joints with wide monitored interlocked doors
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

High-speed or hinged doorsAGV interface pointsCeiling purge moduleAdditional forklift guard rails

Planning a Cleanroom Material Airlock specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun