Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Material de sala limpia Airlock por
A wide, reinforced airlock for moving carts, racks and production equipment between controlled cleanroom zones.
- Cart and rack clearance
- Reinforced flush floor
- Wide interlocked doors
- Impact-protected lower walls
Introducción del producto
The Cleanroom Material Airlock is sized around rolling loads rather than individual pedestrian traffic. Wide door openings, a flush reinforced floor and lower-wall impact protection help accommodate carts, racks and equipment movement. The interlocked door sequence controls the transfer boundary, while configurable supply, return or purge connections can support recovery of the intended air condition after large door openings.
Características clave
Lower-wall bumper rails protect finished panels from routine cart contact.
Wide openings can be matched to the equipment envelope and transfer route.
Door-zone sensing can confirm that a load is clear before the next release.
Purge and pressure-equalisation provisions can be incorporated into the enclosure layout.
Preocupaciones del producto del cliente
Large rolling loads occupy doors longer and create different structural and airflow demands from a personnel-only entrance.
Raised thresholds interrupt pallet-jack and cart movement.A continuous reinforced floor provides a level route through the airlock.
Carts strike cleanroom panels and exposed devices.Bumper rails and recessed hardware protect the enclosure surfaces.
A large door opening changes the air condition before the clean-side door releases.The enclosure can include purge timing and pressure-monitoring connections suited to the HVAC design.
A parked load prevents a door from closing completely.Optional position sensing can hold the sequence until both doorway zones are clear.
Aplicaciones típicas
Pharmaceutical equipment transferClean cart routesSemiconductor production racksBattery material stagingMedical manufacturing tool movement
Parámetros técnicos
Material-airlock dimensions are determined by the largest rolling load, clear door opening and the intended cleanroom pressure arrangement.
| Materiales Core | High-density polyurethane insulated reinforced cleanroom panels |
|---|---|
| Panel de espesor | 75–100 mm |
| Ancho efectivo | 1500–3000 mm clear opening |
| Longitud máxima | 3000–8000 mm airlock length |
| Acero frente a espesor | 1,0 - 1,5 mm |
| Densidad Core | 40–45 kg/m³ |
| Conductividad térmica | 0.022–0.030 W/(m·K) |
| Superficie acabada | Brushed stainless lower walls with powder-coated cleanroom panels above |
| Tipo conjunto | Reinforced sealed panel joints with wide monitored interlocked doors |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
High-speed or hinged doorsAGV interface pointsCeiling purge moduleAdditional forklift guard rails
Planning a Cleanroom Material Airlock specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
