Wide cleanroom material airlock with stainless lower-wall impact rails

인력 및 재료 오염 제거 장비

클린룸 재료 공기 잠금

A wide, reinforced airlock for moving carts, racks and production equipment between controlled cleanroom zones.

Cart and rack clearance
Reinforced flush floor
Wide interlocked doors
Impact-protected lower walls

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Material Airlock is sized around rolling loads rather than individual pedestrian traffic. Wide door openings, a flush reinforced floor and lower-wall impact protection help accommodate carts, racks and equipment movement. The interlocked door sequence controls the transfer boundary, while configurable supply, return or purge connections can support recovery of the intended air condition after large door openings.

주요 기능

A level reinforced floor supports wheeled transfers across the airlock threshold.

Lower-wall bumper rails protect finished panels from routine cart contact.

Wide openings can be matched to the equipment envelope and transfer route.

Door-zone sensing can confirm that a load is clear before the next release.

Purge and pressure-equalisation provisions can be incorporated into the enclosure layout.

고객 제품 관심사

Large rolling loads occupy doors longer and create different structural and airflow demands from a personnel-only entrance.

Raised thresholds interrupt pallet-jack and cart movement.A continuous reinforced floor provides a level route through the airlock.

Carts strike cleanroom panels and exposed devices.Bumper rails and recessed hardware protect the enclosure surfaces.

A large door opening changes the air condition before the clean-side door releases.The enclosure can include purge timing and pressure-monitoring connections suited to the HVAC design.

A parked load prevents a door from closing completely.Optional position sensing can hold the sequence until both doorway zones are clear.

일반적인 응용 프로그램

Pharmaceutical equipment transferClean cart routesSemiconductor production racksBattery material stagingMedical manufacturing tool movement

기술 매개변수

Material-airlock dimensions are determined by the largest rolling load, clear door opening and the intended cleanroom pressure arrangement.

핵심 재료	High-density polyurethane insulated reinforced cleanroom panels
패널 두께	75–100 mm
유효 폭	1500–3000 mm clear opening
최대 길이	3000–8000 mm airlock length
강철 면면 두께	1. 0 - 1. 5 mm
코어 밀도	40 - 45 kg / m 3
열전도도 (Thermal Conductivity)	0.022–0.030 W/(m·K)
표면 마무리	Brushed stainless lower walls with powder-coated cleanroom panels above
접합 유형	Reinforced sealed panel joints with wide monitored interlocked doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

High-speed or hinged doorsAGV interface pointsCeiling purge moduleAdditional forklift guard rails

Planning a Cleanroom Material Airlock specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.