English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
غرفة نظيفة المواد قفل الهواء
A wide, reinforced airlock for moving carts, racks and production equipment between controlled cleanroom zones.
- Cart and rack clearance
- Reinforced flush floor
- Wide interlocked doors
- Impact-protected lower walls
مقدمة المنتج
The Cleanroom Material Airlock is sized around rolling loads rather than individual pedestrian traffic. Wide door openings, a flush reinforced floor and lower-wall impact protection help accommodate carts, racks and equipment movement. The interlocked door sequence controls the transfer boundary, while configurable supply, return or purge connections can support recovery of the intended air condition after large door openings.
الخصائص الرئيسية
Lower-wall bumper rails protect finished panels from routine cart contact.
Wide openings can be matched to the equipment envelope and transfer route.
Door-zone sensing can confirm that a load is clear before the next release.
Purge and pressure-equalisation provisions can be incorporated into the enclosure layout.
مخاوف المنتج للعملاء
Large rolling loads occupy doors longer and create different structural and airflow demands from a personnel-only entrance.
Raised thresholds interrupt pallet-jack and cart movement.A continuous reinforced floor provides a level route through the airlock.
Carts strike cleanroom panels and exposed devices.Bumper rails and recessed hardware protect the enclosure surfaces.
A large door opening changes the air condition before the clean-side door releases.The enclosure can include purge timing and pressure-monitoring connections suited to the HVAC design.
A parked load prevents a door from closing completely.Optional position sensing can hold the sequence until both doorway zones are clear.
تطبيقات نموذجية
Pharmaceutical equipment transferClean cart routesSemiconductor production racksBattery material stagingMedical manufacturing tool movement
المعلمات الفنية
Material-airlock dimensions are determined by the largest rolling load, clear door opening and the intended cleanroom pressure arrangement.
| المواد الأساسية | High-density polyurethane insulated reinforced cleanroom panels |
|---|---|
| سمك اللوحة | 75–100 mm |
| العرض الفعال | 1500–3000 mm clear opening |
| الحد الأقصى الطول | 3000–8000 mm airlock length |
| الصلب يواجه سمك | 1.0-1.5 مم |
| الكثافة الأساسية | 40–45 kg/m³ |
| الموصلية الحرارية | 0.022–0.030 W/(m·K) |
| إنهاء السطح | Brushed stainless lower walls with powder-coated cleanroom panels above |
| نوع المشترك | Reinforced sealed panel joints with wide monitored interlocked doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
High-speed or hinged doorsAGV interface pointsCeiling purge moduleAdditional forklift guard rails
Planning a Cleanroom Material Airlock specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
