Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Móveis de sala limpa e produtos de aço inoxidável
Tabela de instrumentos de sala limpa
A compact all-stainless equipment stand with a solid upper deck, ledgeless lower shelf and round-tube frame for cleanroom instruments.
- Compact instrument footprint
- Ledgeless lower storage shelf
- Round-tube welded frame
- Accessible leveling feet
Introdução do produto
The cleanroom instrument table provides a dedicated support for compact analysers, monitors, pumps and benchtop process equipment. Its solid stainless upper deck has a low marine edge that contains small spills without obstructing loading. A ledgeless lower shelf holds accessories or service modules clear of the floor, and the open round-tube frame exposes every surface to routine wiping. Adjustable feet set the deck level without the particle traps associated with enclosed casework.
Características-chave
The low perimeter edge retains minor drips while leaving the front open for direct loading.
A ledgeless lower shelf provides accessible auxiliary storage without a closed cabinet cavity.
Fully welded round tubing reduces external corners and presents smooth lines for wipe-down.
Preocupações do produto do cliente
Compact instruments are often placed on oversized benches or improvised stands that waste floor area and complicate cleaning.
An instrument and its controller occupy unrelated surfaces and create long exposed cable runs.Upper and lower decks keep the operating unit and its auxiliary hardware on one compact stand.
Flat shelves allow small liquid leaks to reach the frame and floor.A low marine edge contains minor drips on the removable cleaning surface.
Box-section legs and enclosed cupboards create inaccessible corners around a small device.An open round-tube base leaves the instrument perimeter and floor visible for cleaning.
A narrow instrument rocks when the floor is uneven.Four accessible threaded feet level the support independently at each corner.
Aplicações típicas
Particle counter supportPortable analyser placementSmall process pump stationEnvironmental monitor standBenchtop controller support
Parâmetros técnicos
Typical configurable specifications for a stainless cleanroom instrument table are listed below.
| Material principal | Solid Type 304 stainless steel upper deck and lower shelf on a sealed round-tube frame |
|---|---|
| Painel de espessura | 1.2–1.5 mm stainless deck and shelf with formed reinforcement |
| Largura efetiva | 450–750 mm instrument deck depth |
| Comprimento máximo | 1800 mm |
| Aço enfrentando espessura | 1.2–1.5 mm Type 304 stainless steel |
| Densidade Core | 7900–8000 kg/m³ solid stainless components |
| Condutividade térmica | 14–16 W/(m·K) for Type 304 stainless steel |
| Superfície acabado | Brushed No. 4 stainless steel with radiused edges and smooth welds |
| Tipo conjunto | Continuous welded round-tube frame with formed ledgeless deck and shelf connections |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Type 316L stainless steel constructionElectropolished finishLocking cleanroom castersCable rail or rear equipment shelf
Planning a Cleanroom Instrument Table specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
