Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Z Table d'instruments Cleanroom
A compact all-stainless equipment stand with a solid upper deck, ledgeless lower shelf and round-tube frame for cleanroom instruments.
- Compact instrument footprint
- Ledgeless lower storage shelf
- Round-tube welded frame
- Accessible leveling feet
Introduction de produit
The cleanroom instrument table provides a dedicated support for compact analysers, monitors, pumps and benchtop process equipment. Its solid stainless upper deck has a low marine edge that contains small spills without obstructing loading. A ledgeless lower shelf holds accessories or service modules clear of the floor, and the open round-tube frame exposes every surface to routine wiping. Adjustable feet set the deck level without the particle traps associated with enclosed casework.
Key Features
The low perimeter edge retains minor drips while leaving the front open for direct loading.
A ledgeless lower shelf provides accessible auxiliary storage without a closed cabinet cavity.
Fully welded round tubing reduces external corners and presents smooth lines for wipe-down.
Préoccupations du client produit
Compact instruments are often placed on oversized benches or improvised stands that waste floor area and complicate cleaning.
An instrument and its controller occupy unrelated surfaces and create long exposed cable runs.Upper and lower decks keep the operating unit and its auxiliary hardware on one compact stand.
Flat shelves allow small liquid leaks to reach the frame and floor.A low marine edge contains minor drips on the removable cleaning surface.
Box-section legs and enclosed cupboards create inaccessible corners around a small device.An open round-tube base leaves the instrument perimeter and floor visible for cleaning.
A narrow instrument rocks when the floor is uneven.Four accessible threaded feet level the support independently at each corner.
Les applications typiques
Particle counter supportPortable analyser placementSmall process pump stationEnvironmental monitor standBenchtop controller support
Paramètres techniques
Typical configurable specifications for a stainless cleanroom instrument table are listed below.
| Matériaux de base | Solid Type 304 stainless steel upper deck and lower shelf on a sealed round-tube frame |
|---|---|
| Panneau épaisseur | 1.2–1.5 mm stainless deck and shelf with formed reinforcement |
| Largeur effective | 450–750 mm instrument deck depth |
| Longueur maximale | 1800 mm |
| Acier face épaisseur | 1.2–1.5 mm Type 304 stainless steel |
| Densité Core | 7900–8000 kg/m³ solid stainless components |
| Conductivité thermique | 14–16 W/(m·K) for Type 304 stainless steel |
| surface finie | Brushed No. 4 stainless steel with radiused edges and smooth welds |
| Type joint | Continuous welded round-tube frame with formed ledgeless deck and shelf connections |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Type 316L stainless steel constructionElectropolished finishLocking cleanroom castersCable rail or rear equipment shelf
Planning a Cleanroom Instrument Table specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
