Compact stainless cleanroom instrument table with lower shelf

クリーンルーム家具 · ステンレス製品

クリーンルーム計器テーブル

A compact all-stainless equipment stand with a solid upper deck, ledgeless lower shelf and round-tube frame for cleanroom instruments.

Compact instrument footprint
Ledgeless lower storage shelf
Round-tube welded frame
Accessible leveling feet

見積もりリクエスト製品案内

商品紹介

The cleanroom instrument table provides a dedicated support for compact analysers, monitors, pumps and benchtop process equipment. Its solid stainless upper deck has a low marine edge that contains small spills without obstructing loading. A ledgeless lower shelf holds accessories or service modules clear of the floor, and the open round-tube frame exposes every surface to routine wiping. Adjustable feet set the deck level without the particle traps associated with enclosed casework.

主要な特徴

A rigid solid upper deck supports compact instruments without perforations beneath their feet.

The low perimeter edge retains minor drips while leaving the front open for direct loading.

A ledgeless lower shelf provides accessible auxiliary storage without a closed cabinet cavity.

Fully welded round tubing reduces external corners and presents smooth lines for wipe-down.

お客様の製品に関する懸念事項

Compact instruments are often placed on oversized benches or improvised stands that waste floor area and complicate cleaning.

An instrument and its controller occupy unrelated surfaces and create long exposed cable runs.Upper and lower decks keep the operating unit and its auxiliary hardware on one compact stand.

Flat shelves allow small liquid leaks to reach the frame and floor.A low marine edge contains minor drips on the removable cleaning surface.

Box-section legs and enclosed cupboards create inaccessible corners around a small device.An open round-tube base leaves the instrument perimeter and floor visible for cleaning.

A narrow instrument rocks when the floor is uneven.Four accessible threaded feet level the support independently at each corner.

典型的な用途

Particle counter supportPortable analyser placementSmall process pump stationEnvironmental monitor standBenchtop controller support

技術的なパラメータ

Typical configurable specifications for a stainless cleanroom instrument table are listed below.

コア材料	Solid Type 304 stainless steel upper deck and lower shelf on a sealed round-tube frame
パネルの厚さ	1.2–1.5 mm stainless deck and shelf with formed reinforcement
有効幅	450–750 mm instrument deck depth
最大長さ	1800 mm
鋼鉄の厚さを直面する	1.2–1.5 mm Type 304 stainless steel
コア密度	7900–8000 kg/m³ solid stainless components
熱伝導率	14–16 W/(m·K) for Type 304 stainless steel
表面仕上げ	Brushed No. 4 stainless steel with radiused edges and smooth welds
ジョイントタイプ	Continuous welded round-tube frame with formed ledgeless deck and shelf connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Type 316L stainless steel constructionElectropolished finishLocking cleanroom castersCable rail or rear equipment shelf

Planning a Cleanroom Instrument Table specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する