Compact stainless cleanroom instrument table with lower shelf

클린룸 가구 및 스테인레스 스틸 제품

클린룸 계기 테이블

A compact all-stainless equipment stand with a solid upper deck, ledgeless lower shelf and round-tube frame for cleanroom instruments.

Compact instrument footprint
Ledgeless lower storage shelf
Round-tube welded frame
Accessible leveling feet

견적 요청 제품 찾아보기

상품 소개

The cleanroom instrument table provides a dedicated support for compact analysers, monitors, pumps and benchtop process equipment. Its solid stainless upper deck has a low marine edge that contains small spills without obstructing loading. A ledgeless lower shelf holds accessories or service modules clear of the floor, and the open round-tube frame exposes every surface to routine wiping. Adjustable feet set the deck level without the particle traps associated with enclosed casework.

주요 기능

A rigid solid upper deck supports compact instruments without perforations beneath their feet.

The low perimeter edge retains minor drips while leaving the front open for direct loading.

A ledgeless lower shelf provides accessible auxiliary storage without a closed cabinet cavity.

Fully welded round tubing reduces external corners and presents smooth lines for wipe-down.

고객 제품 관심사

Compact instruments are often placed on oversized benches or improvised stands that waste floor area and complicate cleaning.

An instrument and its controller occupy unrelated surfaces and create long exposed cable runs.Upper and lower decks keep the operating unit and its auxiliary hardware on one compact stand.

Flat shelves allow small liquid leaks to reach the frame and floor.A low marine edge contains minor drips on the removable cleaning surface.

Box-section legs and enclosed cupboards create inaccessible corners around a small device.An open round-tube base leaves the instrument perimeter and floor visible for cleaning.

A narrow instrument rocks when the floor is uneven.Four accessible threaded feet level the support independently at each corner.

일반적인 응용 프로그램

Particle counter supportPortable analyser placementSmall process pump stationEnvironmental monitor standBenchtop controller support

기술 매개변수

Typical configurable specifications for a stainless cleanroom instrument table are listed below.

핵심 재료	Solid Type 304 stainless steel upper deck and lower shelf on a sealed round-tube frame
패널 두께	1.2–1.5 mm stainless deck and shelf with formed reinforcement
유효 폭	450–750 mm instrument deck depth
최대 길이	1800 mm
강철 면면 두께	1.2–1.5 mm Type 304 stainless steel
코어 밀도	7900–8000 kg/m³ solid stainless components
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for Type 304 stainless steel
표면 마무리	Brushed No. 4 stainless steel with radiused edges and smooth welds
접합 유형	Continuous welded round-tube frame with formed ledgeless deck and shelf connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Type 316L stainless steel constructionElectropolished finishLocking cleanroom castersCable rail or rear equipment shelf

Planning a Cleanroom Instrument Table specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.