English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
جداول أدوات الغرفة النظيفة
A compact all-stainless equipment stand with a solid upper deck, ledgeless lower shelf and round-tube frame for cleanroom instruments.
- Compact instrument footprint
- Ledgeless lower storage shelf
- Round-tube welded frame
- Accessible leveling feet
مقدمة المنتج
The cleanroom instrument table provides a dedicated support for compact analysers, monitors, pumps and benchtop process equipment. Its solid stainless upper deck has a low marine edge that contains small spills without obstructing loading. A ledgeless lower shelf holds accessories or service modules clear of the floor, and the open round-tube frame exposes every surface to routine wiping. Adjustable feet set the deck level without the particle traps associated with enclosed casework.
الخصائص الرئيسية
The low perimeter edge retains minor drips while leaving the front open for direct loading.
A ledgeless lower shelf provides accessible auxiliary storage without a closed cabinet cavity.
Fully welded round tubing reduces external corners and presents smooth lines for wipe-down.
مخاوف المنتج للعملاء
Compact instruments are often placed on oversized benches or improvised stands that waste floor area and complicate cleaning.
An instrument and its controller occupy unrelated surfaces and create long exposed cable runs.Upper and lower decks keep the operating unit and its auxiliary hardware on one compact stand.
Flat shelves allow small liquid leaks to reach the frame and floor.A low marine edge contains minor drips on the removable cleaning surface.
Box-section legs and enclosed cupboards create inaccessible corners around a small device.An open round-tube base leaves the instrument perimeter and floor visible for cleaning.
A narrow instrument rocks when the floor is uneven.Four accessible threaded feet level the support independently at each corner.
تطبيقات نموذجية
Particle counter supportPortable analyser placementSmall process pump stationEnvironmental monitor standBenchtop controller support
المعلمات الفنية
Typical configurable specifications for a stainless cleanroom instrument table are listed below.
| المواد الأساسية | Solid Type 304 stainless steel upper deck and lower shelf on a sealed round-tube frame |
|---|---|
| سمك اللوحة | 1.2–1.5 mm stainless deck and shelf with formed reinforcement |
| العرض الفعال | 450–750 mm instrument deck depth |
| الحد الأقصى الطول | 1800 mm |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304 stainless steel |
| الكثافة الأساسية | 7900–8000 kg/m³ solid stainless components |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 304 stainless steel |
| إنهاء السطح | Brushed No. 4 stainless steel with radiused edges and smooth welds |
| نوع المشترك | Continuous welded round-tube frame with formed ledgeless deck and shelf connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Type 316L stainless steel constructionElectropolished finishLocking cleanroom castersCable rail or rear equipment shelf
Planning a Cleanroom Instrument Table specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
