Compact stainless cleanroom instrument table with lower shelf

Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri

Temiz Oda Alet Masası

A compact all-stainless equipment stand with a solid upper deck, ledgeless lower shelf and round-tube frame for cleanroom instruments.

Compact instrument footprint
Ledgeless lower storage shelf
Round-tube welded frame
Accessible leveling feet

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The cleanroom instrument table provides a dedicated support for compact analysers, monitors, pumps and benchtop process equipment. Its solid stainless upper deck has a low marine edge that contains small spills without obstructing loading. A ledgeless lower shelf holds accessories or service modules clear of the floor, and the open round-tube frame exposes every surface to routine wiping. Adjustable feet set the deck level without the particle traps associated with enclosed casework.

Ana Özellikler

A rigid solid upper deck supports compact instruments without perforations beneath their feet.

The low perimeter edge retains minor drips while leaving the front open for direct loading.

A ledgeless lower shelf provides accessible auxiliary storage without a closed cabinet cavity.

Fully welded round tubing reduces external corners and presents smooth lines for wipe-down.

Müşteri Ürün Sorunları

Compact instruments are often placed on oversized benches or improvised stands that waste floor area and complicate cleaning.

An instrument and its controller occupy unrelated surfaces and create long exposed cable runs.Upper and lower decks keep the operating unit and its auxiliary hardware on one compact stand.

Flat shelves allow small liquid leaks to reach the frame and floor.A low marine edge contains minor drips on the removable cleaning surface.

Box-section legs and enclosed cupboards create inaccessible corners around a small device.An open round-tube base leaves the instrument perimeter and floor visible for cleaning.

A narrow instrument rocks when the floor is uneven.Four accessible threaded feet level the support independently at each corner.

Tipik uygulamalar

Particle counter supportPortable analyser placementSmall process pump stationEnvironmental monitor standBenchtop controller support

Teknik parametreler

Typical configurable specifications for a stainless cleanroom instrument table are listed below.

Temel malzemeler	Solid Type 304 stainless steel upper deck and lower shelf on a sealed round-tube frame
Panel kalınlığı	1.2–1.5 mm stainless deck and shelf with formed reinforcement
Effective Width (Etkili Genişlik)	450–750 mm instrument deck depth
Maksimum uzunluk	1800 mm
Çelik yüz yüze kalınlığı	1.2–1.5 mm Type 304 stainless steel
Core Density (Çekirdek Yoğunluğu)	7900–8000 kg/m³ solid stainless components
Termal İletkenlik	14–16 W/(m·K) for Type 304 stainless steel
Yüzey bitirme	Brushed No. 4 stainless steel with radiused edges and smooth welds
Ortak tip	Continuous welded round-tube frame with formed ledgeless deck and shelf connections
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Type 316L stainless steel constructionElectropolished finishLocking cleanroom castersCable rail or rear equipment shelf

Planning a Cleanroom Instrument Table specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun