Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Câmara limpa dupla face fita
Clear double-sided cleanroom tape with acrylic adhesive and a red polypropylene release liner for controlled temporary mounting and joining.
- Clear film carrier coated with acrylic adhesive on both faces
- Red polypropylene release liner supports clean handling
- Removable grade for temporary mounting and fixture control
Introdução do produto
Cleanroom Double-Sided Tape creates concealed bonds without introducing exposed paper backing. A dimensionally stable clear film carrier is adhesive coated on both sides and protected by a red polypropylene liner until application. The removable acrylic grade supports temporary fixtures, signs, films and process aids while enabling clean separation from qualified smooth substrates.
Características-chave
Red polymer liner is easy to identify and peel during installation
Removable acrylic adhesive permits repositioning during setup
Stable carrier supports accurate slit edges and die-cut parts
Controlled processing and clean packaging limit loose contamination
Preocupações do produto do cliente
Double-sided mounting materials can be difficult to position because the second adhesive face is hidden during assembly. Residue, liner fragments and uncontrolled bond strength may also complicate changeover in sensitive work areas.
Thin clear tape can be difficult to see during liner removal.Use a contrasting red polypropylene liner and controlled peel tab.
Misalignment may trap the adhesive before the fixture is positioned.Apply one face first, align the assembly, then remove the second liner progressively.
Excessive dwell can increase removal force on delicate surfaces.Qualify removable adhesive against the actual substrate and planned dwell time.
Rough or contaminated substrates can reduce effective contact area.Clean and dry compatible surfaces and use firm uniform application pressure.
Aplicações típicas
Suitable for temporary sign and nameplate mounting, plastic-film joining, process-fixture attachment, cleanroom construction aids, electronics assembly masks and removable positioning of smooth lightweight components.
Parâmetros técnicos
These values describe a thin removable double-coated tape for cleanroom mounting. Final carrier, width, peel strength and liner configuration should be chosen for the bonded materials and removal schedule.
| Material principal | Clear polymer film carrier with removable acrylic adhesive on both faces |
|---|---|
| Painel de espessura | 0.08-0.10 mm excluding release liner |
| Largura efetiva | 12-76 mm roll width |
| Comprimento máximo | 32900 mm roll length |
| Aço enfrentando espessura | 0 mm; no steel facing used |
| Densidade Core | 1350-1400 kg/m³ clear film carrier |
| Condutividade térmica | 0.15-0.24 W/(m·K), carrier and adhesive dependent |
| Superfície acabado | Clear double-coated film with smooth red polypropylene release liner |
| Tipo conjunto | Pressure-sensitive acrylic adhesive on both faces with peel-away liner |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Removable or permanent acrylic adhesiveClear, red or blue polymer release liner12-76 mm slit widthsRoll, sheet or precision die-cut formatThin film or closed-cell foam carrierClassic-clean or higher-cleanliness packaging
Planning a Cleanroom Double-Sided Tape specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
