Clear double-sided cleanroom tape roll with red release liner in three-quarter view

Temiz Oda Giysileri, PPE ve Tüketim Malzemeleri

Temiz Oda Çift Taraflı Bant

Clear double-sided cleanroom tape with acrylic adhesive and a red polypropylene release liner for controlled temporary mounting and joining.

Clear film carrier coated with acrylic adhesive on both faces
Red polypropylene release liner supports clean handling
Removable grade for temporary mounting and fixture control

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Cleanroom Double-Sided Tape creates concealed bonds without introducing exposed paper backing. A dimensionally stable clear film carrier is adhesive coated on both sides and protected by a red polypropylene liner until application. The removable acrylic grade supports temporary fixtures, signs, films and process aids while enabling clean separation from qualified smooth substrates.

Ana Özellikler

Double-coated clear film bonds two surfaces with minimal visible bulk

Red polymer liner is easy to identify and peel during installation

Removable acrylic adhesive permits repositioning during setup

Stable carrier supports accurate slit edges and die-cut parts

Controlled processing and clean packaging limit loose contamination

Müşteri Ürün Sorunları

Double-sided mounting materials can be difficult to position because the second adhesive face is hidden during assembly. Residue, liner fragments and uncontrolled bond strength may also complicate changeover in sensitive work areas.

Thin clear tape can be difficult to see during liner removal.Use a contrasting red polypropylene liner and controlled peel tab.

Misalignment may trap the adhesive before the fixture is positioned.Apply one face first, align the assembly, then remove the second liner progressively.

Excessive dwell can increase removal force on delicate surfaces.Qualify removable adhesive against the actual substrate and planned dwell time.

Rough or contaminated substrates can reduce effective contact area.Clean and dry compatible surfaces and use firm uniform application pressure.

Tipik uygulamalar

Suitable for temporary sign and nameplate mounting, plastic-film joining, process-fixture attachment, cleanroom construction aids, electronics assembly masks and removable positioning of smooth lightweight components.

Teknik parametreler

These values describe a thin removable double-coated tape for cleanroom mounting. Final carrier, width, peel strength and liner configuration should be chosen for the bonded materials and removal schedule.

Temel malzemeler	Clear polymer film carrier with removable acrylic adhesive on both faces
Panel kalınlığı	0.08-0.10 mm excluding release liner
Effective Width (Etkili Genişlik)	12-76 mm roll width
Maksimum uzunluk	32900 mm roll length
Çelik yüz yüze kalınlığı	0 mm; Çelik yüzü kullanılmaz
Core Density (Çekirdek Yoğunluğu)	1350-1400 kg/m³ clear film carrier
Termal İletkenlik	0.15-0.24 W/(m·K), carrier and adhesive dependent
Yüzey bitirme	Clear double-coated film with smooth red polypropylene release liner
Ortak tip	Pressure-sensitive acrylic adhesive on both faces with peel-away liner
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Removable or permanent acrylic adhesiveClear, red or blue polymer release liner12-76 mm slit widthsRoll, sheet or precision die-cut formatThin film or closed-cell foam carrierClassic-clean or higher-cleanliness packaging

Planning a Cleanroom Double-Sided Tape specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun