Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom Double Sided Tape par
Clear double-sided cleanroom tape with acrylic adhesive and a red polypropylene release liner for controlled temporary mounting and joining.
- Clear film carrier coated with acrylic adhesive on both faces
- Red polypropylene release liner supports clean handling
- Removable grade for temporary mounting and fixture control
Introduction de produit
Cleanroom Double-Sided Tape creates concealed bonds without introducing exposed paper backing. A dimensionally stable clear film carrier is adhesive coated on both sides and protected by a red polypropylene liner until application. The removable acrylic grade supports temporary fixtures, signs, films and process aids while enabling clean separation from qualified smooth substrates.
Key Features
Red polymer liner is easy to identify and peel during installation
Removable acrylic adhesive permits repositioning during setup
Stable carrier supports accurate slit edges and die-cut parts
Controlled processing and clean packaging limit loose contamination
Préoccupations du client produit
Double-sided mounting materials can be difficult to position because the second adhesive face is hidden during assembly. Residue, liner fragments and uncontrolled bond strength may also complicate changeover in sensitive work areas.
Thin clear tape can be difficult to see during liner removal.Use a contrasting red polypropylene liner and controlled peel tab.
Misalignment may trap the adhesive before the fixture is positioned.Apply one face first, align the assembly, then remove the second liner progressively.
Excessive dwell can increase removal force on delicate surfaces.Qualify removable adhesive against the actual substrate and planned dwell time.
Rough or contaminated substrates can reduce effective contact area.Clean and dry compatible surfaces and use firm uniform application pressure.
Les applications typiques
Suitable for temporary sign and nameplate mounting, plastic-film joining, process-fixture attachment, cleanroom construction aids, electronics assembly masks and removable positioning of smooth lightweight components.
Paramètres techniques
These values describe a thin removable double-coated tape for cleanroom mounting. Final carrier, width, peel strength and liner configuration should be chosen for the bonded materials and removal schedule.
| Matériaux de base | Clear polymer film carrier with removable acrylic adhesive on both faces |
|---|---|
| Panneau épaisseur | 0.08-0.10 mm excluding release liner |
| Largeur effective | 12-76 mm roll width |
| Longueur maximale | 32900 mm roll length |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 1350-1400 kg/m³ clear film carrier |
| Conductivité thermique | 0.15-0.24 W/(m·K), carrier and adhesive dependent |
| surface finie | Clear double-coated film with smooth red polypropylene release liner |
| Type joint | Pressure-sensitive acrylic adhesive on both faces with peel-away liner |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Removable or permanent acrylic adhesiveClear, red or blue polymer release liner12-76 mm slit widthsRoll, sheet or precision die-cut formatThin film or closed-cell foam carrierClassic-clean or higher-cleanliness packaging
Planning a Cleanroom Double-Sided Tape specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
