English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
غرفة نظيفة مزدوجة الوجه الشريط
Clear double-sided cleanroom tape with acrylic adhesive and a red polypropylene release liner for controlled temporary mounting and joining.
- Clear film carrier coated with acrylic adhesive on both faces
- Red polypropylene release liner supports clean handling
- Removable grade for temporary mounting and fixture control
مقدمة المنتج
Cleanroom Double-Sided Tape creates concealed bonds without introducing exposed paper backing. A dimensionally stable clear film carrier is adhesive coated on both sides and protected by a red polypropylene liner until application. The removable acrylic grade supports temporary fixtures, signs, films and process aids while enabling clean separation from qualified smooth substrates.
الخصائص الرئيسية
Red polymer liner is easy to identify and peel during installation
Removable acrylic adhesive permits repositioning during setup
Stable carrier supports accurate slit edges and die-cut parts
Controlled processing and clean packaging limit loose contamination
مخاوف المنتج للعملاء
Double-sided mounting materials can be difficult to position because the second adhesive face is hidden during assembly. Residue, liner fragments and uncontrolled bond strength may also complicate changeover in sensitive work areas.
Thin clear tape can be difficult to see during liner removal.Use a contrasting red polypropylene liner and controlled peel tab.
Misalignment may trap the adhesive before the fixture is positioned.Apply one face first, align the assembly, then remove the second liner progressively.
Excessive dwell can increase removal force on delicate surfaces.Qualify removable adhesive against the actual substrate and planned dwell time.
Rough or contaminated substrates can reduce effective contact area.Clean and dry compatible surfaces and use firm uniform application pressure.
تطبيقات نموذجية
Suitable for temporary sign and nameplate mounting, plastic-film joining, process-fixture attachment, cleanroom construction aids, electronics assembly masks and removable positioning of smooth lightweight components.
المعلمات الفنية
These values describe a thin removable double-coated tape for cleanroom mounting. Final carrier, width, peel strength and liner configuration should be chosen for the bonded materials and removal schedule.
| المواد الأساسية | Clear polymer film carrier with removable acrylic adhesive on both faces |
|---|---|
| سمك اللوحة | 0.08-0.10 mm excluding release liner |
| العرض الفعال | 12-76 mm roll width |
| الحد الأقصى الطول | 32900 mm roll length |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 1350-1400 kg/m³ clear film carrier |
| الموصلية الحرارية | 0.15-0.24 W/(m·K), carrier and adhesive dependent |
| إنهاء السطح | Clear double-coated film with smooth red polypropylene release liner |
| نوع المشترك | Pressure-sensitive acrylic adhesive on both faces with peel-away liner |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Removable or permanent acrylic adhesiveClear, red or blue polymer release liner12-76 mm slit widthsRoll, sheet or precision die-cut formatThin film or closed-cell foam carrierClassic-clean or higher-cleanliness packaging
Planning a Cleanroom Double-Sided Tape specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
