English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Двусторонняя лента для чистых помещений
Clear double-sided cleanroom tape with acrylic adhesive and a red polypropylene release liner for controlled temporary mounting and joining.
- Clear film carrier coated with acrylic adhesive on both faces
- Red polypropylene release liner supports clean handling
- Removable grade for temporary mounting and fixture control
Введение продукции
Cleanroom Double-Sided Tape creates concealed bonds without introducing exposed paper backing. A dimensionally stable clear film carrier is adhesive coated on both sides and protected by a red polypropylene liner until application. The removable acrylic grade supports temporary fixtures, signs, films and process aids while enabling clean separation from qualified smooth substrates.
Основные характеристики
Red polymer liner is easy to identify and peel during installation
Removable acrylic adhesive permits repositioning during setup
Stable carrier supports accurate slit edges and die-cut parts
Controlled processing and clean packaging limit loose contamination
Обеспокоенность клиентов продуктами
Double-sided mounting materials can be difficult to position because the second adhesive face is hidden during assembly. Residue, liner fragments and uncontrolled bond strength may also complicate changeover in sensitive work areas.
Thin clear tape can be difficult to see during liner removal.Use a contrasting red polypropylene liner and controlled peel tab.
Misalignment may trap the adhesive before the fixture is positioned.Apply one face first, align the assembly, then remove the second liner progressively.
Excessive dwell can increase removal force on delicate surfaces.Qualify removable adhesive against the actual substrate and planned dwell time.
Rough or contaminated substrates can reduce effective contact area.Clean and dry compatible surfaces and use firm uniform application pressure.
Типичные приложения
Suitable for temporary sign and nameplate mounting, plastic-film joining, process-fixture attachment, cleanroom construction aids, electronics assembly masks and removable positioning of smooth lightweight components.
Технические параметры
These values describe a thin removable double-coated tape for cleanroom mounting. Final carrier, width, peel strength and liner configuration should be chosen for the bonded materials and removal schedule.
| Основной материал | Clear polymer film carrier with removable acrylic adhesive on both faces |
|---|---|
| Толщина панели | 0.08-0.10 mm excluding release liner |
| эффективная ширина | 12-76 mm roll width |
| Максимальная длина | 32900 mm roll length |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 1350-1400 kg/m³ clear film carrier |
| Теплопроводимость | 0.15-0.24 W/(m·K), carrier and adhesive dependent |
| Поверхностная отделка | Clear double-coated film with smooth red polypropylene release liner |
| Объединенный тип | Pressure-sensitive acrylic adhesive on both faces with peel-away liner |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Removable or permanent acrylic adhesiveClear, red or blue polymer release liner12-76 mm slit widthsRoll, sheet or precision die-cut formatThin film or closed-cell foam carrierClassic-clean or higher-cleanliness packaging
Planning a Cleanroom Double-Sided Tape specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
