Clear double-sided cleanroom tape roll with red release liner in three-quarter view

Garmen Cleanroom, PPE dan Consumables

Cleanroom Double-Sided Tape

Clear double-sided cleanroom tape with acrylic adhesive and a red polypropylene release liner for controlled temporary mounting and joining.

Clear film carrier coated with acrylic adhesive on both faces
Red polypropylene release liner supports clean handling
Removable grade for temporary mounting and fixture control

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Cleanroom Double-Sided Tape creates concealed bonds without introducing exposed paper backing. A dimensionally stable clear film carrier is adhesive coated on both sides and protected by a red polypropylene liner until application. The removable acrylic grade supports temporary fixtures, signs, films and process aids while enabling clean separation from qualified smooth substrates.

Fitur utama:

Double-coated clear film bonds two surfaces with minimal visible bulk

Red polymer liner is easy to identify and peel during installation

Removable acrylic adhesive permits repositioning during setup

Stable carrier supports accurate slit edges and die-cut parts

Controlled processing and clean packaging limit loose contamination

Kekhawatiran produk pelanggan

Double-sided mounting materials can be difficult to position because the second adhesive face is hidden during assembly. Residue, liner fragments and uncontrolled bond strength may also complicate changeover in sensitive work areas.

Thin clear tape can be difficult to see during liner removal.Use a contrasting red polypropylene liner and controlled peel tab.

Misalignment may trap the adhesive before the fixture is positioned.Apply one face first, align the assembly, then remove the second liner progressively.

Excessive dwell can increase removal force on delicate surfaces.Qualify removable adhesive against the actual substrate and planned dwell time.

Rough or contaminated substrates can reduce effective contact area.Clean and dry compatible surfaces and use firm uniform application pressure.

Aplikasi yang Tipis

Suitable for temporary sign and nameplate mounting, plastic-film joining, process-fixture attachment, cleanroom construction aids, electronics assembly masks and removable positioning of smooth lightweight components.

Parameter teknis

These values describe a thin removable double-coated tape for cleanroom mounting. Final carrier, width, peel strength and liner configuration should be chosen for the bonded materials and removal schedule.

Bahan inti	Clear polymer film carrier with removable acrylic adhesive on both faces
Ketebalan Panel (Panel Thickness)	0.08-0.10 mm excluding release liner
Efektif lebar	12-76 mm roll width
Panjang maksimum	32900 mm roll length
Baja menghadap ketebalan	0 mm; tidak ada baja menghadap yang digunakan
Kepadatan inti (core density)	1350-1400 kg/m³ clear film carrier
Konduktivitas Termal (Thermal Conductivity)	0.15-0.24 W/(m·K), carrier and adhesive dependent
Permukaan selesai	Clear double-coated film with smooth red polypropylene release liner
Jenis Bersama	Pressure-sensitive acrylic adhesive on both faces with peel-away liner
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Removable or permanent acrylic adhesiveClear, red or blue polymer release liner12-76 mm slit widthsRoll, sheet or precision die-cut formatThin film or closed-cell foam carrierClassic-clean or higher-cleanliness packaging

Planning a Cleanroom Double-Sided Tape specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami